Compared with traditional technological innovation modes, green technology innovation is more targeted for low carbon development and critical support for countries worldwide to combat climate change. The impact of green technology innovation on carbon emissions is considered in terms of fixed effect and mediating effect models through industrial structure upgrading. For this purpose, the sample dataset of 30 provincial administrative areas in China from 2008 to 2020 is employed. The results demonstrate that (...) class='Hi'>green technology innovation exerts significantly inhibitory effects on carbon emissions, whose conclusion still holds after removing municipalities and replacing the dependent variable. Industrial structure upgrading is vital for green technology innovation to diminish carbon emissions. There is significant regional heterogeneity in the effects of green technology innovation on carbon emissions, i.e., the direct and indirect impact of green technology innovation on carbon emission reduction is significant in the eastern-central area, but its effect is insignificant in the western region. Therefore, it is essential to realize carbon emission reduction by further bolstering green technology innovation and accelerating industrial structure upgrading to fulfill the synergy of technology and structure. (shrink)

Green technology innovation (GTI) has been increasingly adopted by firms worldwide to promote sustainable development, whereas its potential downsides have been largely overlooked. Drawing on moral licensing theory, we devise a framework to reveal the potential dark side of firms’ GTI on corporate social responsibility (CSR). We argue that with the global eco-awakening, GTI has been an efficient means for firms to meet their stakeholders’ expectations and environmental legitimacy. This may cause a moral licensing effect for senior (...) executives’ ethical strategic decision-making, due to their belief that existing GTI could balance the firm’s subsequent moral neglect, thereby minimizing firms’ CSR. Using the Chinese listed manufacturing firms as a sample, we find empirical support for our prediction. In addition, we investigate how firms’ environmental awards and honors may exacerbate the negative impact of GTI on CSR, whereas the presence of women executives may mitigate the relation. Our findings can trigger firms’ reflections on GTI’s downsides, and contribute to research and practice in comprehensively understanding firms’ GTI consequences, CSR decisions, and moral balance. (shrink)

In May 1973 a new collaboration between NASA, the Indian Health Service, and the Lockheed Missiles and Space Company promised to transform the way members of the Papago (now Tohono O’odham) Tribe of southern Arizona accessed modern medicine. Through a system of state-of-the-art microwave relays, slow-scan television links, and Mobile Health Units, the residents of the third-largest American Indian reservation began to access physicians remotely via telemedical encounters instead of traveling to distant hospitals. Examining the history of the STARPAHC (Space (...) Technology Applied to Rural Papago Advanced Health Care) project from the perspective of NASA and its contractors, from the perspective of the Indian Health Service, and from the perspective of O’odham engineers and health professionals offers a new focus, emphasizing the American Indian reservation as a site of medical research and technological development in the late twentieth century, with specific attention to the promise of information technology to address health disparities and the role of American Indians as actors in the late twentieth-century history of science, technology, and medicine. (shrink)

Complex adaptation systems are the main development direction of China’s current green innovation research. New material industry is one of the key entry points to accelerate the construction of modern industrial system and promote innovation, green, and efficient development. Under the requirements of China’s current low-carbon development, China’s green innovation system is developing rapidly. Green innovation complicates traditional innovation models and their functions and improves economic development. The purpose of this paper (...) is to study the theoretical analysis framework of applying complex adaptive systems and to analyze and calculate the characteristics of the current status of green innovation systems in multiple industries in China’s manufacturing industry. Analysis is as follows. The experimental group and the control group are set for comparison, and the data are organized by applying complex adaptive system theory and data analysis methods. Experimental data show that the coordinated development of the green innovation systems in various industries in China is not balanced, with a difference of more than three times; the parameters of the various green innovation systems within the industry are unbalanced, and the difference is more than five times. The experimental results show that the green innovation subject can strategically interact by adjusting the ratio of resource allocation through the constructed green innovation system model. The green innovation system with complex adaptive system theory is conducive to the development of the green system. It can save about 23% of green innovation time and improve efficiency by about 15%, to promote the development of green innovation in China. (shrink)

While a growing body of literature has examined the link between green activities and firm innovation, little attention has been paid to the underlying mechanisms through which green activities take effect. This paper leverages the context of ISO 14001 certification among Chinese listed firms to investigate how the certification of environmental management system to ISO 14001 shapes corporate technological innovation. Drawing from the resource-based view and the resource management perspective, we argue that EMS certification to ISO (...) 14001 facilitates corporate technological innovation through the mediating effects of firms’ internal resource management practices, namely resource utilization, resource accumulation, and resource allocation. A difference-in-differences research design, together with the propensity score matching approach and the instrumental variable technique, provides corroborating evidence for our predictions. The current research not only makes substantial contributions to the literature, but also provides important ethical implications for both policymakers and firm managers. (shrink)

The drive towards clean technology in the chemical industry with an increasing emphasis on the reduction of waste at source requires a level of innovation and new technology that the chemical industry is beginning to adopt. The green chemistry revolution provides an enormous number of opportunities to discover and apply new synthetic approaches using alternative feedstocks; ecofriendly reaction conditions, energy minimizations and the design of less toxic and inherently safer chemicals. In this review exciting opportunities and (...) some successful examples of green chemistry in practice are described. While developments in the 20th century have brought various social and economic benefits to the people but these changes have also caused a range of environmental problems at both local and global levels. Over recent years, sustainable development has been accepted by government, industry and the public as a necessary goal for achieving social, economic and environmental objectives. Within this, green chemistry plays a key role in maintaining and improving quality of our life and preserving natural environments. The term ‘ Green Chemistry’ was first coined by the US Environmental Protection Agency in the early 1990s and major interest in green chemistry in the US began in earnest with the passage of the ‘Pollution Prevention Act’ of 1990. Thus Green Chemistry becoming a formal focus of the EPA in 1991. (shrink)

Stakeholder pressure and public awareness of environmental protection drive organizations to improve environmental practices in the supply chain, such as green supply chain integration and green innovation. The use of information technology is crucial to manufacturing organizations’ GSCI and performance. However, the research on the relationship between IT capabilities, GSCI, GI and organizational performance is still limited. Therefore, empirical research is needed on the cognitive thinking of employees using IT capabilities to improve GSCI and organizational performance. (...) The data for this study comes from SC personnel in manufacturing organizations through a structured questionnaires and was analyzed by employing structural equation modeling. Based on the results, this paper concludes that organizational IT capabilities positively affect the GSCI and improve organizational performance. Furthermore, the study discovered that GI increases organizational performance and acts as a positive mediator in the link between GSCI and performance. The findings contribute to existing GSCI and GI knowledge, which can provide a bird’s eye-view to develop an organization’s IT capabilities to achieve competitive performance goals. (shrink)

Last year, President Obama launched the Brain Research through Advancing Innovative Neurotechnologies Initiative with the goal of developing new technologies for studying the brain's functioning, right down to the cellular level. The President subsequently asked the Presidential Commission for the Study of Bioethical Issues to develop “a core set of ethical standards” to guide neuroscience research and its applications. This May, the PCSBI issued “Gray Matters: Integrative Approaches for Neuroscience, Ethics, and Society,” the first of a two‐volume response to this (...) request. Although “Gray Matters” mentions some of the ethical issues that together define the emerging field of neuroethics, the report as a whole may disappoint those seeking answers. It focuses almost entirely on the metaquestion of how ethics might be integrated into neuroscience research, offering four recommendations. Even as a preliminary proposal, however, the recommendations in “Gray Matters” do not go far enough. (shrink)

Precision medicine and molecular systems medicine (MSM) are highly utilized and successful approaches to improve understanding, diagnosis, and treatment of many diseases from bench-to-bedside. Especially in the COVID-19 pandemic, molecular techniques and biotechnological innovation have proven to be of utmost importance for rapid developments in disease diagnostics and treatment, including DNA and RNA sequencing technology, treatment with drugs and natural products and vaccine development. The COVID-19 crisis, however, has also demonstrated the need for systemic thinking and transdisciplinarity and (...) the limits of MSM: the neglect of the bio-psycho-social systemic nature of humans and their context as the object of individual therapeutic and population-oriented interventions. COVID-19 illustrates how a medical problem requires a transdisciplinary approach in epidemiology, pathology, internal medicine, public health, environmental medicine, and socio-economic modeling. Regarding the need for conceptual integration of these different kinds of knowledge we suggest the application of general system theory (GST). This approach endorses an organism-centered view on health and disease, which according to Ludwig von Bertalanffy who was the founder of GST, we call Organismal Systems Medicine (OSM). We argue that systems science offers wider applications in the field of pathology and can contribute to an integrative systems medicine by (i) integration of evidence across functional and structural differentially scaled subsystems, (ii) conceptualization of complex multilevel systems, and (iii) suggesting mechanisms and non-linear relationships underlying the observed phenomena. We underline these points with a proposal on multi-level systems pathology including neurophysiology, endocrinology, immune system, genetics, and general metabolism. An integration of these areas is necessary to understand excess mortality rates and polypharmacological treatments. In the pandemic era this multi-level systems pathology is most important to assess potential vaccines, their effectiveness, short-, and long-time adverse effects. We further argue that these conceptual frameworks are not only valid in the COVID-19 era but also important to be integrated in a medicinal curriculum. (shrink)

This Research Topic focuses on both strengths and weaknesses of social innovation, technological innovation, and health innovation that are increasingly recognized as crucial concepts related to the formulation of responses to the social, health, and environmental challenges. Goals of this Research Topic: (1) to identify and share the best recent practices and innovations related to social, environmental and health policies; (2) to debate on relevant governance modes, management tools as well as evaluation and impact assessment techniques; (3) (...) to discuss dilemmas in the fields of management, financing, designing, implementing, testing, and maintaining the sustainability of innovative models of delivering social, health and care services; and (4) to recognize and analyze social, technological and health innovation that has emerged or has been scaled-up to respond to crisis situations, for example, a pandemic of the COVID-19 coronavirus disease. (shrink)

Organizational sustainability in the form of environmental management and sustainable production is becoming more important for small and medium-sized enterprises throughout the world. This research evaluates the factors affecting the understanding of the CEO's and managers' intention to adopt practices of green supply chain management and clean innovation technology in the manufacturing SMEs of Pakistan. This empirical research identifies key determinants influencing the adoption of GSCM practices. Using structural equation modeling, we selected a sample size of 350 (...) different manufacturing firms in Pakistan. The results of the study revealed that six factors, namely, environmental, government, organization, suppliers, market, and operational factors, significantly influence the intention to adopt GSCM and positively impact sustainable production. The study's findings reveal that market and operational factors are highly significant for adopting GSCM practices at a p-value of 0.05. Environmental and organizational factors are equally significant to adopt GSCM practices at a p-value of 0.10. This research also analyzed CIT as a moderator between environmental, government, organization, customer, supplier, economic, market, and operational factors in the context of Pakistan. Hypotheses H9a, H9b, H9f, and H9g were validated and support the use of CIT to boost enterprise production and consumption. The research findings would help policymakers understand how to implement GSCM practices and guide enterprises to implement GSCM and CIT practices for enhancing enterprise performance and environmental sustainability. (shrink)

This study aims to map out the relationships that make up green innovation initiatives in Brazilian industry. The sample comprised 100 managers at manufacturing companies, most of them operating in the business of farm machinery and equipment and steel structures. To develop this study, Medeiros et al. study, mapping critical factors that drive the success of green product innovation and the paradigm of complexity, was used as a reference study. Based on the results, it was possible (...) to identify that the operational dynamic of the factors and variables that affect market success do not happen in an isolated or fragmented way; they occur systematically with different contingencies and structured basic and intermediate skills in order to meet the expectations of consumers, laws, and environmental legislation. Initially, the technological expertise factor was noted as very important for sustaining green product innovation. Furthermore, since proactive leaders are an important factor for successfully developing environmentally sustainable products, it must be added to technological expertise as the foundation for developing green innovation. After defining the basis for green product innovation, the intermediary conditions necessary for using the available technology appropriately were mapped out. In this sense, variables such as “elimination of cultural barriers,” “capacity for critical reflective analysis,” and “experimentation” are also very important. In addition, some of the variables of the cross-functional collaboration and market knowledge factors were a part of the structure that organizations need to transform potential into developing green products, which is the basis for the third level of the model. The fourth level of the model has the “meeting consumer expectations” and “following law and legislation” factors, which make up the main goals for developing environmentally sustainable products according to a number of surveys that were conducted. (shrink)

Although the political and consumer consciousness has turned increasingly green, many firms continue to resist the adoption of environment-friendly technological innovations—even in the face of higher costs, negative health effects, and stricter government oversight. This article examines how business owners weigh the trade-offs associated with environment-friendly innovations by examining the role of prosocial motivation in their decision-making process. We use primary data to overcome a common restriction in studying environmental innovations—the scarcity of relevant data—to analyze how business owners’ expectations, (...) perceptions, and motivations affect innovation in organizational processes and, consequently, the level of environmental friendliness of their products or services. We found that prosocial motivation had a significant negative impact on innovation adoption and that it is expressed differently under high and low levels of customer compatibility—possibly because business owners have a larger number of competing social objectives and priorities. Our results further showed that the innovation’s ability to satisfy downstream customer demands has the greatest impact on environment-friendly innovation adoption decisions by business owners. This study enhances our understanding of how business owners make innovation decisions based on competing business, environmental and social objectives and provides a foundation for future research in this area. (shrink)

This study aims to map out the relationships that make up green innovation initiatives in Brazilian industry. The sample comprised 100 managers at manufacturing companies, most of them operating in the business of farm machinery and equipment and steel structures. To develop this study, Medeiros et al. study, mapping critical factors that drive the success of green product innovation and the paradigm of complexity, was used as a reference study. Based on the results, it was possible (...) to identify that the operational dynamic of the factors and variables that affect market success do not happen in an isolated or fragmented way; they occur systematically with different contingencies and structured basic and intermediate skills in order to meet the expectations of consumers, laws, and environmental legislation. Initially, the technological expertise factor was noted as very important for sustaining green product innovation. Furthermore, since proactive leaders are an important factor for successfully developing environmentally sustainable products, it must be added to technological expertise as the foundation for developing green innovation. After defining the basis for green product innovation, the intermediary conditions necessary for using the available technology appropriately were mapped out. In this sense, variables such as “elimination of cultural barriers,” “capacity for critical reflective analysis,” and “experimentation” are also very important. In addition, some of the variables of the cross-functional collaboration and market knowledge factors were a part of the structure that organizations need to transform potential into developing green products, which is the basis for the third level of the model. The fourth level of the model has the “meeting consumer expectations” and “following law and legislation” factors, which make up the main goals for developing environmentally sustainable products according to a number of surveys that were conducted. (shrink)

At present, in the context of the era of energy and digital reform enabling the “dual carbon” goal, in order to improve the performance of urban green innovation, digitalization has become more and more important. Based on panel data, taking 228 prefecture-level cities in China from 2003 to 2019 as an example, this study expounds three dimensions of promoting green innovation performance in the internal mechanism of digital development: direct transmission mechanism, indirect transmission mechanism, and regional (...) heterogeneity transmission mechanism. This article uses mechanism analysis and adopts a dynamic spatial panel model and systematic GMM method to empirically test the growth effect of green innovation performance endowed by digitization. This article found that green innovation performance showed regional heterogeneity and urban heterogeneity after adding carbon dioxide emissions from energy consumption, and digital development significantly improved the level of innovation performance. Further research found that digitalization has a positive impact on technological innovation, and technological innovation also has a positive impact on green innovation performance. And technological innovation plays a mediating role between digitalization and green innovation performance. Different intensities of environmental regulation play a positive moderating role in the impact of digitalization on green innovation performance. (shrink)

This paper critiques the so-called “Green Revolution” as a political myth of averted famine. A “political myth,” among other functions, reflects a narrative structure that characterizes understandings of causality between policy action and outcome. As such, the details of a particular political myth elevate certain policy options over others. One important narrative strand of the political myths of the Green Revolution is a story of averted famine: in the 1950s and 1960s, scientists predicted a global crisis to emerge (...) in the 1970s and beyond, created by a rapidly growing global population that would cause global famine as food supplies would not keep up with demand. The narrative posits that an intense period of technological innovation in agricultural productivity led to increasing crop yields which led to more food being produced, and the predicted crisis thus being averted. The fact that the world did not experience a global famine in the 1970s is cited as evidence in support of the narrative. Political myths need not necessarily be supported by evidence, but to the extent that they shape understandings of cause and effect in policymaking, political myths which are not grounded in evidence risk misleading policymakers and the public. We argue a political myth of the Green Revolution focused on averted famine is not well grounded in evidence and thus has potential to mislead to the extent it guides thinking and action related to technological innovation. We recommend an alternative narrative: The Green Evolution, in which sustainable improvements in agricultural productivity did not necessarily avert a global famine, but nonetheless profoundly shaped the modern world. More broadly, we argue that one of the key functions of the practice of technology assessment is to critique and to help create the political myths that preserve an evidence-grounded basis for connecting the cause and effect of policy action and practical outcomes. (shrink)

Governing greenwashing in environmental, social, and governance (ESG) disclosure is an important issue, but relevant literature is scant. Based on the data on Chinese A-share listed firms from 2012 to 2021, we investigate the governance role of corporate digital transformation (DT) in ESG greenwashing and its influencing mechanism. We find that DT significantly inhibits ESG greenwashing. Moreover, DT mitigates ESG greenwashing by enhancing corporate green technology innovation (i.e., innovation channel), reducing information asymmetry (i.e., information channel), and (...) increasing trade credit (i.e., resource channel). From the perspective of investor attention, we find that both retail investors' online opinions and institutional investors' site visits strengthen the inhibitory effect of DT on ESG greenwashing. Furthermore, such an inhibitory effect is more pronounced in large firms, industries with high competition, and regions with strong intellectual property protection. This research provides new insights and policy suggestions for governing corporate ESG greenwashing behavior. (shrink)

The green economy is essential in supporting sustainable economic development and relies on talents and technologies. From the perspective of traditional economic theory, this study explores the impact of high-speed rail and innovation on the green economy from the perspectives of talent and technology. Using the data of 281 prefecture-level cities in China from 2008 to 2018, this study constructs empirical models to discuss the driving factors of the green economy. Empirical results show that high-speed (...) rail and innovation can promote the development of a green economy, and the opening of high-speed rail can strengthen the positive association between innovation and a green economy. The accessibility of high-speed rail improves the flow of talent between different cities and greatly stimulates the positive impact of innovation on green economic activities. In the further test, this study explores the impact of high-speed rail and innovation on the green economy from different dimensions, including government policy, economic strength, and administrative level. During China’s 12th Five-Year Plan, high-speed rail and innovation had a positive impact on the green economy, but the impact of innovation can still be significant after this period. Moreover, the opening of high-speed rail may motivate the migration of talents from developed cities to developing ones, while developed cities can rely on technological advantages to support green economic activities. Furthermore, low-administrative level cities will rely on attracting more talents to promote a green economy due to technological disadvantages. Innovation can play a critical role in enhancing the green economy of cities with high administrative levels. Talents and technology are both important to green economic activities, and the construction of high-speed rail changes the impact of technology on the green economy through the flow of talent. Our findings can explain why the opening of high-speed rail can promote the development of a green economy and effectively help governments achieve the goal of sustainable development. (shrink)

For achieving the sustainable development goals, green development has been raised to a high position for cities in China. The economic development in Northwest China is slow, the ecological environment is fragile, and the mineral resources are rich. Only through green development can we realize the comprehensive income of regional production development, rich life, and good ecology. This paper measures the green development efficiency of 30 prefecture-level cities in Northwest China by using DEA-SBM model of unexpected output, (...) explores the differences and causes of green development efficiency from the perspective of time and space through convergence coefficient, coordination matrix, GIS, and other methods, and empirically tests the impact of industrial structure, technological progress, and other driving factors on green development efficiency by using panel Tobit model. The results show that, on the whole, the efficiency of green development in Northwest China is low, path dependence is serious and unbalanced, the coordinated development effect of different regions is weak, and the spillover effect of core urban agglomerations has not been effectively exerted; from the perspective of driving factors, economic development, population density, traffic situation, and education investment can significantly improve the efficiency of urban green development, and the second is that the proportion of industries significantly hinders the improvement of green development efficiency, while the impact of scientific and technological innovation is not significant. Based on the empirical results, this paper believes that the harmonious development of natural environment and economic society can be realized only by improving the coordinated development effect among cities, implementing the optimization and upgrading of industrial structure, introducing excellent talents, and promoting the technological upgrading. (shrink)

Sustainable development goals are aligning marketing innovations to meet sustainability interventions. Recently, marketing has evolved to incorporate sustainability in outreach objectives. Heightened literature on the interplay between sustainability, innovations, and marketing demands a holistic understanding to guide future research direction. The current review bridges the research gap using quantitative performance analysis and qualitative intellectual structure analysis. The thematic and content analysis points towards permeating sustainability focus across the business verticals and value chain for differentiated brand positioning and sustainability-based competitive advantage. (...) The emergent conceptual framework underpins the moderated-mediation role of sustainability and economic enablers with marketing initiatives to promote business innovations beneficial to all stakeholders. The sustainability-aligned innovations in products and processes reflect in gaining cost advantage, revenue generation, access to newer markets, and differentiation. It can be inferred from the study that sustainability and conducive marketing strategies can co-create value across the value chain, providing tangible and non-tangible corporate payoffs. This cross-section in the research domain calls for environmental and business focus at the micro and macro levels, supported by pro-business strategies, system efficiencies, productivity, and technological changes in synergy with the societal landscape. The findings discern strategic directions for practitioners to chart out an organizational portfolio centered around marketing innovations to create business value for the shareholders and sustainability value for the stakeholders, ecosystem, and society. The conceptual framework can help academicians comprehend the business model around sustainability, innovations, and marketing. The evolutionary mapping of the research domain can be used to discern corporate or macro-level policies and transcend reforms aligned to the dynamic market/stakeholder expectations. (shrink)

Are there circumstances under which scientists and engineers doing their ordinary jobs can be thought of as participants in a social movement? The technoscientists analyzed in this article are at the forefront of a new way of doing chemistry; they are attempting to redesign chemical products and synthesis pathways to significantly reduce health effects and environmental damage from industrial chemicals. Green chemistry practitioners and entrepreneurs now constitute a small minority of chemists and chemical engineers in the university, government, and (...) corporate sectors, but the innovators gradually are institutionalizing their efforts and winning converts. Drawing on concepts from social movement theory, the authors argue that examining green chemistry as a social movement sheds light on the intentional social organization of emerging scientific and engineering disciplines, advances thinking about the role of expertise in social change, and uncovers a possible pathway toward reconstructing chemical technologies on a more environmentally sustainable basis. The article closes with questions about potential coalitions among green chemists and engineers, regulators, and activist sectors of civil society. (shrink)

As part of a new focus on sustainability, this study examines the effects of technological attributes, market potential, and environmental factors on the commercialization of technologies. A survey was conducted on two of Taiwan’s promising sustainable high-tech industries—solar photovoltaic (PV) and light emitting diodes (LEDs). We found that if the technologies possess the specific attributes of innovativeness, genericness, simplicity, and compatibility, as required by the potential adopters, the level of market potential will be more favorable and technology commercialization (TC) (...) probability will be higher. In addition, the results of regression analysis indicate that environmental requirements play moderating roles in affecting the relationships between market potential and TC probability. The empirical findings highlight the role of market potential as a mediator between technological attributes and the likelihood of commercialization. Furthermore, environmental factors moderate the influence of market potential on TC. The results of this study can provide firms’ operations with insights into resource allocation, sustainable development, and competitive advantages in an intensely competitive environment. (shrink)

This study reveals that increases in the global population command an augmented demand for products and services that calls for more effective ways of using existing natural resources and materials. The recent development of information and communication technologies, which had a great impact on many areas, also had a damaging effect on the environment and human health. Therefore, societies are moving toward a greener future by reducing the consumption of nonrenewable materials, raw materials, and resources while at the same time (...) decreasing energy pollution and consumption. Since information technology is considered a tool for solving ecological difficulties, the green Internet of things is playing a vital role in creating a sustainable home. Extensive data analysis is required to obtain a valuable overview of the large and diverse data generated by the G-IoT. The gathered information will facilitate forecasting, decision-making, and other activities related to smart urban services and then contribute to the incessant development of G-IoT technology. Therefore, even if sustainable and smart cities become an actuality, the G-IoT approach and the knowledge gained through big data analysis will make cities more sustainable, safer, and smarter. The goal of this article is to combine innovation in technological development with the main focus on resource sharing in creating cities that improve the quality of life while reducing pollution and realizing more efficient use of the raw materials. In the practice of big data science, it is always of interest to provide the best description of the data under consideration. Recent studies have pointed out the applicability of the statistical distributions in modeling data in applied sciences. In this article, we introduce a new family of statistical models to provide the best description of the life span of the wireless sensors network’s data. Based on the proposed approach, a special submodel called new exponent power-Weibull distribution is studied in detail. The applicability of the proposed model is shown by analyzing the life span of the wireless sensors network’s data. (shrink)

Environmental sustainability has become the need of the hour and has been emphasized immensely because of the increased environmental awareness and resulting problems caused due to negligence. This study has intended to determine the role of knowledge management practices in achieving a sustainable environment with the mediating role of environmental awareness and green technological use. The study further examined the moderating role of green innovative culture between the relationship of KM practices and a sustainable environment. The data were (...) acquired from 378 managerial level personnel of the construction industry in China through questionnaires. Smart-PLS 3.3.3 was used to determine the study's hypothesis through the structural equation modeling technique. The study found that KM practice has a significant relationship with a sustainable environment, environmental awareness, and green technological use. Also, environmental awareness has a significant effect on a sustainable environment. Moreover, it was found in the study that environmental awareness significantly mediated the relationship between KM practices and sustainable environment, but green technological use did not find any mediating effect on the relationship between KM practices and sustainable environment. Furthermore, green innovative culture considerably moderated the relationship between KM practices and a sustainable environment. Theoretically, this study contributes to the existing literature by incorporating and investigating the role of KM practices in a sustainable environment. Practically, this article presented some implications for the management concerning promoting KM practices and environmental awareness within the organization and developing a green innovative culture. (shrink)

A free world is one in which human beings can live free, self-directed lives. A great obstacle to such a world is severe poverty, still blighting the lives of half of humankind. We have the resources, technologies, and administrative capacities to eradicate severe poverty, but doing so requires some restructuring of existing social arrangements. We might begin with the current regime governing innovation, which has monopoly markups as its key funding source. Such monopoly rents encourage the quest for innovations, (...) but also greatly impede their diffusion. This headwind harms the poor, who cannot afford monopoly prices and whose specific needs innovators thus tend to ignore. It also works against potential innovations whose benefits would mostly go to third parties whom buyers care little about. Both problems can be much alleviated through a supplementary alternative reward mechanism that would enable innovators to exchange their monopoly privileges on any patentable technology for impact rewards based on the social benefits achieved with it. By promoting innovations and their diffusion together, international impact funds would bring substantial gains in justice and cost-effectiveness, especially in the pharmaceutical and green-technology sectors. (shrink)

A common tactic in public debates over science and technology is to dismissively label innovations as mere technological fixes. This tactic can be readily observed in the long debate over agricultural biotechnology. While these criticisms are often superficial rhetorical tactics, they point to deeper philosophical disagreements about the role of technology in society. Examining the technological fix criticism can clarify these underlying philosophical disagreements and the debate over biotechnology. The first part of this essay discusses the origins of (...) the notion of a technological fix and distinguishes two types of technological fix criticisms, philosophical and practical. These distinctions are then applied to clarify and evaluate arguments for and against agricultural biotechnology. This analysis should clarify the debates over agricultural biotechnology and bring to light fundamental philosophical differences over the role of technology in agriculture. (shrink)

Social innovations are usually understood as new ideas, initiatives, or solutions that make it possible to meet the challenges of societies in fields such as social security, education, employment, culture, health, environment, housing, and economic development. On the one hand, many citizen science activities serve to achieve scientific as well as social and educational goals. Thus, these actions are opening an arena for introducing social innovations. On the other hand, some social innovations are further developed, adapted, or altered after the (...) involvement of scientist-supervised citizens in research and with the use of the citizen science tools and methods such as action research, crowdsourcing, and community-based participatory research. Such approaches are increasingly recognized as crucial for gathering data, addressing community needs, and creating engagement and cooperation between citizens and professional scientists. However, there are also various barriers to both citizen science and social innovation. For example, management, quality and protection of data, funding difficulties, non-recognition of citizens’ contributions, and limited inclusion of innovative research approaches in public policies. In this volume, we open theoretical as well as empirically-based discussion, including examples, practices, and case studies of at least three types of relations between citizen science and social innovation: domination of the citizen science features over social innovation aspects; domination of the social innovation features over the citizen science aspects; and the ways to achieve balance and integration between the social innovation and citizen science features. Each of these relationships highlights factors that influence the development of the main scales of sustainability of innovations in the practice. These innovations are contributing to a new paradigm of learning and sharing knowledge as well as interactions and socio-psychological development of participants. Also, there are factors that influence the development of platforms, ecosystems, and sustainability of innovations such as broad use of the information and communications technologies including robotics and automation; emerging healthcare and health promotion models; advancements in the development and governance of smart, green, inclusive and age-friendly cities and communities; new online learning centers; agri-food, cohousing or mobility platforms; and engagement of citizens into co-creation or co-production of services delivered by public, private, non-governmental organizations as well as non-formal entities. (shrink)

Lifecycle assessment (LCA) is a valuable tool in teaching green engineering and has been used to assess biofuels, including ethanol. An undergraduate engineering course at Duke University has integrated LCA with other interactive teaching techniques to enhance awareness and to inform engineering decision making related to societal issues, such as energy sources and environmental quality. The course also includes a three-part studio beginning with application of thermodynamics, moving to team projects, and ending with a “green” innovation proposal (...) by each student. Students who participated in this interactive series were able to apply LCA to venues beyond biofuels (e.g., computing and brick making). They were also able to consider societal and geopolitical aspects of complex issues, such as comparing benefits to costs and risks associated with increased production of ethanol on decreased food production and environmental impacts. (shrink)

Traditional approaches to conflict are oriented towards establishing consensus, either in the form of a resolution of the conflict or in the form of an ‘agree-to-disagree’ standstill between the stakeholders. In this paper, we criticize these traditional approaches, each for specific reasons, and we propose and develop the agonistic approach to conflict. Based on Chantal Mouffe’s agonistic democratic theory, the agonistic approach to conflict is more welcoming of dissensus, replacing discussion stoppers with discussion starters and replacing standstills with contestation. We (...) illustrate such replacements and develop this approach, we analyse technological conflicts in a concrete R&D setting: the global hydrogen economy. From this context, we focus on the conflict between the proponents of blue hydrogen and those of green hydrogen. We conclude by highlighting the advantage of the agonistic approach but also drawing attention to its own specific risk, namely, antagonism. (shrink)

Innovation is necessary to deal with challenges that climate change brings for agriculture, such as droughts, floods, pests and pathogens that enter new climatic regions, and challenges relating to the labour force. There is a dominant narrative that science and technology are the locus of innovation, and that the solutions developed can change systems. Indeed, history shows how the Green Revolution started a massive change in practices worldwide and gave science and technology the main role. (...) Innovation, however, also happens outside universities or industry research. Particularly in agriculture, it happens in the field through farmers’ experimentation. This opens up the idea of who is an innovator, and it is crucial to tackling climate challenges to agriculture. In this paper, we investigate the role of curiosity as a virtue of innovators. Instead of looking at systems of innovation, or at innovations themselves, we add to the growing scholarship on virtues of innovators. Among those virtues, curiosity is prominent. We argue that different contexts require different forms of the innovator virtues, and we conceptually investigate how such virtues ought to be cultivated in order to contribute to solving 21st century challenges for agriculture. (shrink)

This paper explores how chemists are transforming their own current background in order to act upon the world without jeopardizing life. In this respect, I will envisage science as both a system of propositions and a set of engaged practices. The scrutiny of chemical innovations will allow me to query the concepts of paradigm and that of scientific community . In doing so, I will connect the philosophy of science with the philosophy of technology so as to think about (...) our relation with the world. (shrink)

The challenge of producing sufficient food to feed a growing world population cannot now be met by industrialized and green revolution agriculture as production is currently at or above a sustainable level. Future growth has to occur on resource-poor and marginal lands, where farmers have little or no access to external resources or research and extension support. A precedent for such growth occurred during the agricultural revolution in Britain. Over a period of two centuries crop and livestock production increased (...) 3–4 fold as innovative technologies and techniques developed by farmers were extended to other farmers through tours, farmer groups, open days, and publications, and then adapted to local conditions by rigorous experimentation. These technologies maximized the use of on-farm resources at a time when there was no government ministry of agriculture, no research stations, and no extension institutions. But at the same time as this revolution in on-farm resource use, agriculture also expanded into uncultivated lands, increasing aggregate production but destroying common property resources and so threatening the livelihoods of the poor. (shrink)

Our country’s equipment manufacturing industry ranks among the best in all developing countries, but compared with developed countries, there is still a long way to go. It is not only the backwardness of various technologies, but also the interference of other countries. Although our country's equipment manufacturing industry is not as advanced as the advanced technology of developed countries, we still have to stick to our original aspirations, do not underestimate ourselves, and be good at absorbing and learning from (...) the strengths of others to make up for our own weaknesses. While not working behind closed doors and while absorbing technology from other countries, we can make use of our strengths to make up for our weaknesses and develop our own industrial technology. This paper studies the evolution trend of innovation network structure and at the same time studies the evolution mechanism of advanced equipment manufacturing innovation network structure from the perspective of complex systems. The explained variable in this article is green total factor productivity. The variable adopts the Malmquist–Luenberger global super-efficiency index model. There are two main explanatory variables. One is the heterogeneity that affects the efficiency of industrial evolution, including factor heterogeneity, structural heterogeneity, and environmental heterogeneity, and the other is the interaction term of equipment manufacturing specialization agglomeration degree dummy variable multiplied by factor heterogeneity. The regional economic development level is added to the model as a control variable. In the selection of measurement indicators, the per capita GDP is used as the control variable. The experimental results show that each sample is tested in pairs, and the standard error level of the mean is 0.018, which is less than 0.05, indicating that the efficiency of the equipment manufacturing industry’s economic correlation spatial network has a significant impact on the overall economic development level of the industry. The reduction in spur helps to increase economic output. (shrink)

I discuss three tiers of technological innovation: mild innovation, or the acceleration by technology of a human activity aimed at a good; moderate innovation, or the obviation by technology of an activity aimed at a good; and radical innovation, or the altering by technology of the human condition so as to change what counts as a good. I argue that it is impossible to morally assess proposed innovations within any of these three tiers (...) unless we rehabilitate a natural-law ethical framework. And I offer some moral starting points within such a framework, in connection with innovations of each of the three types. (shrink)

Transition to a sustainable energy regime is one of the key global societal challenges for the coming decades. Many technological innovations are in the pipeline, but an uncritical appraisal of anything and everything called green innovation lacks methods for testing both the necessity and the sufficiency of these developments. We propose to develop a philosophy of energy to fill this lacuna. Its task is to explore and clarify the space in which the so-called energy transition is taking place. (...) This article sketches the fundaments of such a philosophy and suggests how it might be built upon the work of twentieth century critics of the functioning of energy in society, including Mumford, Bataille, and Heidegger; but not without empirical analysis of contemporary energy systems. Via the example of flux and potentiality - two apparently opposing conceptions of energy - we propose that a philosophy of energy allows for a broader perspective on specific problems in energy transition, and illuminates implicit and problematic assumptions behind these problems. (shrink)

Contemporary research highlights multiple societal and environmental benefits in addition to potential economic advantages associated with renewable energy utilization. As federal and state incentives for investments in RE technologies become more prevalent, RE sources represent increasingly viable alternatives to established fossil fuel energy. RE utilization is recognized as a key component of “green” product innovation that helps firms reduce the environmental impact of production processes and diminish their ecological footprints and energy consumption. Yet, despite consistent evidence that corporate (...) sustainability initiatives are favorably associated with firm performance, the limited research that examines associations between RE initiatives and firm performance yields mixed results and an explicit link has yet to be established. Drawing on the natural resource-based view of the firm, we examine the association between RE utilization and firm financial performance over time. Annual ROI, Tobin’s Q, and operating margin for large U.S. firms identified as exceptional users of RE in the EPA’s Fortune 500 Top Green Power Partners list are compared with their respective industry medians over a 7-year period and post hoc bootstrapping and sensitivity analyses are performed to further validate the study findings. Our research advances current knowledge about the influence of RE utilization by demonstrating that top RE user firms consistently generated superior financial performance compared to their industry competitors. As such, the study findings lend credence to the existence of a business case that complements the societal and environmental benefits of RE utilization. (shrink)

Green product innovation has been recognized as one of the key factors to achieve growth, environmental sustainability, and a better quality of life. Understanding green product innovation as a result of interaction between innovation and sustainability has become a strategic priority for theory and practice. This article investigates green product innovation by means of a multiple case study analysis of 12 small to medium size manufacturing companies based in Italy and Canada. First, we (...) propose a conceptual framework that presents three key environmental dimensions of green product innovation such as energy minimization, materials reduction, and pollution prevention as identified in the life cycle phases of products. Based on insights gained from in-depth interviews, we discuss firms' motivations to develop green products, environmental policies and targets for products, different dimensions of green product innovation, and challenges faced during developing and marketing of green products. Results from the study are then synthesized and integrated in a toolbox that sheds light on various aspects of green product innovation and provides solutions to challenges and risks that are faced by firms. Finally, implications for managers, academia and public policy makers are discussed. (shrink)

This article argues that businesses are morally responsible for compensating the people harmed by their activities even if they were not negligent, i.e., the businesses took reasonable precautions. Critics of this position maintain that responsibility requires choice, and by taking precautions, businesses choose not to harm others. This article accepts their argument’s first premise but rejects the second premise. It contends that businesses often seek risky or innovative activities to increase profits, and the essence of innovative activities is that precautions (...) cannot sufficiently reduce their foreseeable harmful consequences. The correct understanding of businesses’ decision-making enables us to appreciate that businesses choose to undertake risky activities while knowing that they can harm others despite preventive measures. It follows that preventive measures should not serve as an excuse against liability for harm. (shrink)

Technological innovation has an important impact on environmental pollution. In this paper, first, we analyze the influence mechanism of technological innovation on environmental pollution and then design the index system of technological innovation. Then, we use the entropy method to calculate the technological innovation level of different regions in China based on provincial panel data from 2004 to 2016. Finally, the panel vector autoregression model is adopted, and taking the discharge of sewage, solid waste, and exhaust (...) gas as the research objects, the impact of technological innovation on them is empirically analyzed. The results show that China’s technological innovation level is steadily improving, but there are significant differences in the impact of technological innovation on wastewater, waste gas, and solid waste. Specifically, technological innovation can contribute to an increase in wastewater and solid waste emissions. However, the impact of this technological innovation on them is not equal. Secondly, the impact of technological innovation on exhaust emissions is to inhibit exhaust emissions in the short term and promote exhaust emissions in the long term. Finally, there are clear differences between them in terms of the specific impact of changes in wastewater, solid waste, and exhaust emissions. Changes in wastewater discharges and solid waste generation are largely derived from their own effects, while the role of technological innovation is supportive and insignificant. The change in exhaust emissions is initially influenced by itself, but in the long run, the influence of technological innovation gradually increases and eventually exceeds its own influence. Based on these research results, this paper puts forward corresponding policy suggestions to speed up environmental pollution control. (shrink)

Technological innovation is almost always investigated from an economic perspective; with few exceptions, the specific technological and social nature of innovation is often ignored. We argue that a novel way to characterise and make sense of different types of technological innovation is to start considering uncertainty. This seems plausible since technological development and innovation almost always occur under conditions of uncertainty. We rely on the distinction between, on the one hand, uncertainty that can be quantified (e.g. (...) probabilistic risk) and, on the other, deep forms of uncertainty that may resist the possibility of being quantified (e.g. severe or fundamental uncertainties). On the basis of these different ingredients of uncertainty in technological innovation, we propose a new taxonomy that reveals the technological nature of innovation. Unlike previous taxonomies employed to handle different types of technological innovations, our taxonomy does not consider the economic value of innovation alone; it is much more oriented towards societal preferences and forms of technological uncertainty. Finally, we investigate the coherence of our proposal with the dual nature of technological artefacts, showing that innovation can be grounded on structural and functional factors and not just on economic ones. (shrink)

This article describes and analyzes the process of institutionalizing studies on science, technology, and society in Cuba, and the social and academic circumstances in which these studies are implemented there. The authors give a brief account of how science and technology have evolved in Cuba over the last four decades. The authors argue that the promotion of science and technological innovation in Cuba has purposely taken the form of social innovation. The authors offer our view of (...) how the changes and demands on science, technology, and education can take advantage of the approaches and proposals of STS studies. The authors consider the traditions of thought that have influenced Cuban culture and construct a specific conceptual framework through which contemporary developments in STS are assimilated. Finally, on the basis of the above analysis, the authors describe experiences of the institutionalization of STS and their underlying objectives. (shrink)

Este trabajo está dirigido a fundamentar cómo a través de un proceso de innovación tecnológica se establecieron relaciones entre la universidad, la sociedad y el sector empresarial. La introducción de los productos biológicos en los laboratorios de diagnóstico médico y su impacto en los servicios fue el elemento fundamental que identificó la relación universidad-sociedad, mientras que la transferencia tecnológica de la obtención de biológicos a la unidad productora y comercializadora articuló a la academia con el mundo empresarial. Los modelos seguidos (...) para la gestión de la actividad de innovación le otorgaron al proceso un carácter específico y aseguraron su pertinencia, por lo que constituyó un logro científico-tecnológico. Se demostró un caso peculiar y concreto de fortalecimiento de las capacidades de interacción de las universidades con entidades productivas y de servicios, de modo que se enriqueció la función extensionista del centro de altos estudios. This article is based on a process of technical innovation that allowed establishing a relationship in which the university, society and the managerial sector were involved. The introduction of the biological products in medical diagnosis labs and its impact on services were the main elements that distinguished the university-society relationship, while the technological transfer to the unit of the biologicals obtained, articulated the university and the managerial field. Models put into practice for innovation management granted the process a specific character and ensured its relevance, that´s why it is considered a scientific-technological achievement. The process demonstrated a peculiar case of interaction between the university and production entities. (shrink)

Innovative forms of green urban architecture aim to combine food, production, and design to produce food on a larger scale in and on buildings in urban areas. It includes rooftop gardens, rooftop greenhouses, indoor farms, and other building-related forms. This study uses the framework of sustainability to understand the role of ZFarming in future urban food production and to review the major benefits and limitations. The results are based on an analysis of 96 documents published in accessible international resources. (...) The analysis shows that ZFarming has multiple functions and produces a range of non-food and non-market goods that may have positive impacts on the urban setting. It promises environmental benefits resulting from the saving and recycling of resources and reduced food miles. Social advantages include improving community food security, the provision of educational facilities, linking consumers to food production, and serving as a design inspiration. In economic terms it provides potential public benefits and commodity outputs. However, managing ZFarming faces several challenges. For some applications, the required technologies are known but have not been used or combined in that way before; others will need entirely new materials or cultivation techniques. Further critical aspects are the problem of high investment costs, exclusionary effects, and a lack of acceptance. In conclusion, ZFarming is seen as an outside-the-box solution which has some potential in generating win–win scenarios in cities. Nevertheless, ZFarming practices are not in and of themselves sustainable and need to be managed properly. (shrink)

Business Ethics, the Environment &Responsibility, EarlyView.

Usually technological innovation and artistic work are seen as very distinctive practices, and innovation of technologies is understood in terms of design and human intention. Moreover, thinking about technological innovation is usually categorized as “technical” and disconnected from thinking about culture and the social. Drawing on work by Dewey, Heidegger, Latour, and Wittgenstein and responding to academic discourses about craft and design, ethics and responsible innovation, transdisciplinarity, and participation, this essay questions these assumptions and examines what (...) kind of knowledge and practices are involved in art and technological innovation. It argues that technological innovation is indeed “technical”, but, if conceptualized as techne, can be understood as art and performance. It is argued that in practice, innovative techne is not only connected to episteme as theoretical knowledge but also has the mode of poiesis: it is not just the outcome of human design and intention but rather involves a performative process in which there is a “dialogue” between form and matter and between creator and environment in which humans and non-humans participate. Moreover, this art is embedded in broader cultural patterns and grammars—ultimately a ‘form of life’—that shape and make possible the innovation. In that sense, there is no gap between science and society—a gap that is often assumed in STS and in, for instance, discourse on responsible innovation. It is concluded that technology and art were only relatively recently and unfortunately divorced, conceptually, but that in practices and performances they were always linked. If we understand technological innovation as a poetic, participative, and performative process, then bringing together technological innovation and artistic practices should not be seen as a marginal or luxury project but instead as one that is central, necessary, and vital for cultural-technological change. This conceptualization supports not only a different approach to innovation but has also social-transformative potential and has implications for ethics of technology and responsible innovation. (shrink)