“Fiiirre!” If someone were to shout that while you were in the midst of reading this essay, you would, like most people, stop reading and look around the room for the source of the shout, or the fire itself. You would also consider whether the likelihood of a fire was sufficiently high to cause you to take appropriate action – for example, locate a fire extinguisher, call the fire department, or leave the room. Of course, you have not been sitting (...) around waiting for someone to yell “Fire!” You were engaged in some task (unrelated to fires), yet were able to react to that stimulus. By contrast, if you were a police officer who was being trained at a firing range, you would be doing exactly that (i.e., waiting for someone to yell “Fire!”), and when you heard “Fire,” you would pull the trigger on your weapon, rather than look around for the source of the cry. (shrink)

DCPS is a connectionist production system interpreter that uses distributed representations. As a connectionist model it consists of many simple, richly interconnected neuron‐like computing units that cooperate to solve problems in parallel. One motivation for constructing DCPS was to demonstrate that connectionist models are capable of representing and using explicit rules. A second motivation was to show how “coarse coding” or “distributed representations” can be used to construct a working memory that requires far fewer units than the number of (...) different facts that can potentially be stored. The simulation we present is intended as a detailed demonstration of the feasibility of certain ideas and should not be viewed as a full implementation of production systems. Our current model only has a few of the many interesting emergent properties that we eventually hope to demonstrate: It is damage‐resistant, it performs matching and variable binding by massively parallel constraint satisfaction, and the capacity of its working memory is dependent on the similarity of the items being stored. (shrink)

The problem of determining an optimal benchmark to inefficient decision-making units is an important issue in the field of performance analysis. Previous methods for determining the projection points of inefficient DMUs have only focused on one objective and other features have been ignored. This paper attempts to determine the best projection point for each DMU when the inputs and outputs data are in stochastic form and presents an alternative definition for the best projection by considering three main aspects: technical efficient, (...) minimal cost, and maximal revenue as much as possible. Considering the important role of the electricity industry in the economic growth of each country, a practical example has been implemented on 16 regional electricity companies in Iran in 9 consecutive periods. The efficiency score along with the projection points of the three technical models ), cost, and stochastic revenue are compared with the projection point obtained from the model presented in this article, which simultaneously meets these three objectives, showing the improvement of companies’ performance. (shrink)

Cattle production has the potential of being an important component of sustainable agriculture globally. The ability to transform feed not suitable for humans into high-quality food will be of great importance in the long-term for feeding a growing population. Other aspects such as preservation of landscape values and maintenance of rural communities are highly appreciated values, especially in the industrialized part of the world.To exploit the sustainable potential of cattle production systems, problems of pollution (such as ozone (...) destruction, acid rain, and nitrate leaching) and of health and welfare, which are associated with cattle production, are critically reviewed. The possibilities of integrating cattle production with other types of production are evaluated. Cattle can be used for single purposes such as dairy, beef, and draught, but dairy cows can also be used for restricted suckling combining dairy and beef production. In addition a mixture of species makes grazing more efficient, and a combination of cattle and mixed cropping can increase resource efficiency. (shrink)

The biomedical literature makes extensive use of the concept of a genetic program. So far, however, the nature of genetic programs has received no satisfactory elucidation from the standpoint of computer science. This unsettling omission has led to doubts about the very existence of genetic programs, on the grounds that gene regulatory networks lack a predetermined schedule of execution, which may seem to contradict the very idea of a program. I show, however, that we can make perfect sense of genetic (...) programs, if only we abandon the preconception that all computers have a von Neumann architecture. Instead, genetic programs instantiate the computational architecture of Post–Newell Production Systems. That is, genetic programs are unordered sets of conditional instructions, instructions that fire independently when their conditions are matched. For illustration I present a paradigm Production System that regulates the functioning of the well-known lac operon of E. coli. On close reflection it turns out that not only genes, but also proteins encode instructions. I propose, therefore, to rename genetic programs to biomolecular programs. Biomolecular and/or genetic programs, and the cellular computers than run them, are to be understood not as von Neumann computers, but as Post–Newell production systems. (shrink)

In many countries consumers have shown an increasing interest to the way in which food products are being produced. This study investigates Chinese consumers’ attitudes towards different pig production systems by means of a conjoint analysis. While there has been a range of studies on Western consumers’ attitudes to various forms of food production, little is known about the level of Chinese consumers’ attitudes. A cross-sectional survey was carried out with 472 participants in 6 Chinese cities. Results (...) indicate that Chinese consumers prefer industrial pig production systems, where traditional pig breeds are raised, over large-scale and small family farms. Farms with maximum attention to food safety, which furthermore can provide lean meat with consistent quality, are also preferred. Imported pig breeds and tasty but variable meat were rejected. A 3-cluster solution found that consumers from cluster 1 focus almost exclusively on the food safety aspect (food safety focused). Consumers from cluster 2 (indifferent) show weak overall attitudes to pig production systems in general. Cluster 3 (industrial production oriented) stands out by being very positive about industrial, large-size farms and consistent quality. From a Chinese consumer’s perspective, the industrial approach seems to represent values such as achievement and evolution, as well as quality and safety, since pig production is moving away from low-cost, low-quality, and low-safety family-scale systems. A complex set of rural and environmental development, quality aspects, and food safety measures are challenges that must be met by the stakeholders of pig production systems in China. (shrink)

Pork producers in Western Europe moreand more encounter a variety of societalconcerns about pork and pork production. Sofar, however, producers predominantly focusedon low consumer prices, therewith addressingjust one concern. This resulted in an intensiveand large-scale production system, decreasinglyrelated to the area of farm land, andaccompanied with increasing concerns aboutsafety and healthiness of pork, animal welfare,environmental pollution, and others.An overview was given of possible concernsabout West-European pork production with theconsumers, citizens, and producers, and thoseconcerns are traced back to (...) the pork productionsystem. The various kinds and qualities ofinformation about the pork production system onwhich possible concerns are based have beenworked out extensively in this paper. Knowledgeabout the aspects of pork production that cangive rise to concerns can be used in two ways.First, the communication about those aspectstowards consumers and citizens can be adjustedor extended to give them better possibilitiesto make food choices or to develop their ownopinions about pork production. Second,producers could change the pork productionsystem such that it better satisfies consumersand citizens. Such adaptations are wellpossible, as three pork quality schemes, whichhave been evaluated, illustrate. However, mostof these adaptations can only be carried out atthe cost of the present low consumer prices andwill not occur spontaneously on a large scale.Therefore, accounting for the type andrelevance of the concerns, legislation isnecessary to address societal concerns in abalanced way such that pork production systemsbecome acceptable for the majority of oursociety. (shrink)

This study considered the range of ethical issues and potential stakeholder priorities associated with the application of genomic technologies applied to animal production systems, in particular those which utilised genomic technologies in accelerated breeding rather than the application of genetic modification. A literature review was used to inform the development of an ethical matrix, which was used to scope the potential perspectives of different agents regarding the acceptability of genomic technologies, as opposed to genetic modification techniques applied to (...) animal production systems. There are very few studies carried out on stakeholder attitudes regarding the application of genomics to animal production in the human food chain and it may be that this technology is perceived as no more than an extension of traditional breeding techniques. While this is an area which needs more research, it would appear from this study that genomics, because it avoids many of the disadvantages and consumer perceptions associated with GM, is likely to prove a more publicly acceptable route than is GM for the development of healthier and more productive animals. However, stakeholders also need to have an approach to the moral status of the animals involved that finds credibility and acceptability with civil society. (shrink)

Since the 1970s, the application of microprocessor in industrial machinery and the development of computer systems have transformed the manufacturing landscape. The rapid integration and automation of production systems have outpaced the development of suitable human design criteria, creating a deepening gap between humans and systems in which human was seen as an important source of errors and disruptions. Today, the situation seems different: the scientific and public debate about the concept of Industry 4.0 has raised (...) awareness about the central role humans have to play in manufacturing systems, the design of which must be considered from the very beginning. The future of industrial systems, as represented by Industry 4.0, will rely on the convergence of several research fields such as Intelligent Manufacturing Systems (IMS), Cyber-Physical Systems (CPS), Internet of Things (IoT), but also socio-technical fields such as social approaches within technical systems. This article deals with different human social dimensions associated with CPS and IoT and focuses on their conceptual evolution regarding automated production systems’ sociability, notably by bringing humans back in the loop. Hereby, this paper aims to take stock of current research trends to show the importance of integrating human operators as a part of a socio-technical system based autonomous and intelligent products or resources. Consequently, different models of sociability as a way to integrate humans in the broad sense and/or the develop future automated production systems have been identified from the literature and analysed. (shrink)

In many countries consumers have shown an increasing interest to the way in which food products are being produced. This study investigates Chinese consumers’ attitudes towards different pig production systems by means of a conjoint analysis. While there has been a range of studies on Western consumers’ attitudes to various forms of food production, little is known about the level of Chinese consumers’ attitudes. A cross-sectional survey was carried out with 472 participants in 6 Chinese cities. Results (...) indicate that Chinese consumers prefer industrial pig production systems, where traditional pig breeds are raised, over large-scale and small family farms. Farms with maximum attention to food safety, which furthermore can provide lean meat with consistent quality, are also preferred. Imported pig breeds and tasty but variable meat were rejected. A 3-cluster solution found that consumers from cluster 1 focus almost exclusively on the food safety aspect. Consumers from cluster 2 show weak overall attitudes to pig production systems in general. Cluster 3 stands out by being very positive about industrial, large-size farms and consistent quality. From a Chinese consumer’s perspective, the industrial approach seems to represent values such as achievement and evolution, as well as quality and safety, since pig production is moving away from low-cost, low-quality, and low-safety family-scale systems. A complex set of rural and environmental development, quality aspects, and food safety measures are challenges that must be met by the stakeholders of pig production systems in China. (shrink)

This article attempts to open the debate on a territorial development perspective that fixes the interest in organized territories that are characterized by the existence of a community with a local identity, politically and administratively regulated. We conceive these territories as subjects of development promotion interventions. For this we propose a model for the creation of Municipal Development Forums, which with the participation of local actors, can generate a tailor-made Local Development Program. The development program will consider a diagnosis of (...) the productive profile of the territory and its relationship with the characteristics and origin of goods or services consumed at the municipality. Based on the diagnosis, the causes of the decoupling between the local production system and consumption needs can be detected. And with this, find a way to readjust local production systems to meet the demand for goods and services of the inhabitants, generating new companies and encouraging local consumption. (shrink)

This article examines the expansion of agrofuels in the Americas and the ecological impacts associated with the technologies used in the production of large-scale monocultures of corn and soybeans. In addition to deforestation and displacement of lands devoted to food crops due to expansion of agrofuels, the massive use of transgenic crops and agrochemical inputs, mainly fertilizers and herbicides used in the production of agrofuels, pose grave environmental problems.

This article discusses the notion that the invisibility of the animalness of the animal constitutes a fundamental obstacle to change within current production systems. It is discussed whether housing animals in environments that resemble natural habitats could lead to a re-animalization of the animals, a higher appreciation of their moral significance, and thereby higher standards of animal welfare. The basic claim is that experiencing the animals in their evolutionary and environmental context would make it harder to objectify animals (...) as mere bioreactors and production systems. It is argued that the historic objectification of animals within intensive animal production can only be reversed if animals are given the chance to express themselves as they are and not as we see them through the tunnel visions of economy and quantifiable welfare assessment parameters. (shrink)

Coexistence between livestock grazing and carnivores in rangelands is a major challenge in terms of sustainable agriculture, animal welfare, species conservation and ecosystem function. Many effective non-lethal tools exist to protect livestock from predation, yet their adoption remains limited. Using a social-ecological transformations framework, we present two qualitative models that depict transformative change in rangelands grazing. Developed through participatory processes with stakeholders from South Africa and the United States of America, the models articulate drivers of change and the essential pathways (...) to transition from routine lethal management of carnivores towards mutually beneficial coexistence. The pathways define broad actions that incorporate multiple values in grazing systems including changes to livestock management practices, financial support, industry capacity building, research, improved governance and marketing initiatives. A key finding is the new concept of ‘Predator Smart Farming’, a holistic and conscientious approach to agriculture, which increases the resilience of landscapes, animals and rural livelihoods. Implementation of these multiple pathways would lead to a future system that ensures thriving agricultural communities, secure livelihoods, reduced violence toward animals, and landscapes that are productive and support species conservation and coexistence. (shrink)

The aim of the paper is to improve availability classifications of components for application in construction systems. Construction production systems belong to project-based systems with serial-parallel structures with or without redundant components, and the availability function has a significant impact on the performance indicators of components and systems. The main indicators of function of the components are the availability, capacity, costs, and project time. A new approach to classification makes it possible to choose the most (...) appropriate methodology for assessing component availability in the bidding phase, and managing company’s machine park. The new classification approach was tested on a practical example. The results obtained confirmed the justification for extending the classical approach to the classification of the availability of components. (shrink)

From Chaos to Creativity is a book that teaches readers how to build a productivity system that works with their art and with their lifestyle. Author Jessie Kwak helps readers tame the chaos that often surrounds a creative career and further enhance readers' creative output.

This article outlines aconceptual framework for examining recentoutbreaks of E. coli O157:H7 infectionassociated with the consumption of beef in theUnited States. We argue that beef produced inthis country is generally safer frombacteriological contamination than in the past.Paradoxically, increasing intensification andconcentration in the meat subsector since theearly 1980s has (a) altered agro-food ecology,including characteristics of foodborne bacteriaand human physiology; (b) created conditionsfavorable for the rapid amplification of lowconcentrations of pathogens; and (c) reducedthe beef industry's flexibility to introducechanges necessary to preclude and/or (...) controlthe rapid spread of pathogens in meat and meatproducts. As a result, beef industry currentlyis capable of producing large quantities ofbacteriologically safe meat whilesimultaneously becoming more vulnerable to foodcontaminations that can be fatal in some cases.The limitations and effectiveness of a newregulatory regime, the HACCP (Hazard Analysisand Critical Control Points) system as well asother efforts to decontaminate the beef supplyare discussed. (shrink)

Sweetpotato-pig production is an important system that generates income, utilizes unmarketable crops, and provides manure for soil fertility maintenance. This system is widely practiced from Asia to Africa, with many local variations. Within this system, pigs are generally fed a low nutrient-dense diet, yielding low growth rates and low economic efficiency. Our project in Vietnam went through a process of situation analysis, participatory technology development (PTD), and scaling up over a seven-year period to improve sweetpotato-pig production and to (...) disseminate developed technologies. The situation analysis included a series of pig production assessments in several provinces in northern and southern Vietnam, and pig supply-market chain identification was conducted in 13 provinces. The analysis of these studies informed the project of the following: (1) appropriate locations for our activities; (2) seasonal available feedstuff and farmers’ feeding practices; (3) market fluctuation and requirements; and (4) feeding and management improvement needs based on which the subsequent phase of PTD was designed. The PTD involved a limited number of farmers participating in sweetpotato varietal selection, sweetpotato root and vine silage processing, seasonal feeding combination, and pig feeding with balanced crop-feed diet and silage. Six years of multi-location and multi-season sweetpotato selection resulted in a few promising varieties that yielded up to 75% more dry matter and have since been formally released. The most significant results of silage processing and feeding trials include improved growth, higher feeding efficiency, increased year-round local feedstuff, and considerable labor reduction from eliminated cooking and vine cutting. Once these technologies were developed, a farmer-to-farmer training model was designed for scaling up the adoption and impact. Farmer trainers from seven communes in seven provinces received training in these technologies. In turn, they undertook the responsibility of training other farmers on sweetpotato selection, processing, and feeding. An impact study was also administered to monitor and evaluate (M&E) the dissemination process and to document the impact of the new technologies and farmer-to-farmer training model on pig growth and farmer income generation. The results showed that both participating and non-participating farmers have taken up the technologies, although the former demonstrates higher rates of adoption than the latter. The participants also generated more income and saved more labor from the adoption of the technologies. While the scaling up and M&E activities are on-going, the project has since broadened from a sweetpotato-pig system perspective to a pig-cropfeed system perspective based on farmers’ needs. It has included other crop feeds such as cassava and peanut stems in the research portfolio. New technologies based on on-going PTD will continuously be incorporated into the future training curriculum. (shrink)

This paper juxtaposes Deleuze's notion of the virtual alongside Oyama's notion of a developmental system in order to explore the promises and perils of thinking bodily identity as indeterminate at a time when new technologies render bodily ambiguity increasingly productive of both economic profit and power relations.

This paper juxtaposes Deleuze's notion of the virtual alongside Oyama's notion of a developmental system in order to explore the promises and perils of thinking bodily identity as indeterminate at a time when new technologies render bodily ambiguity increasingly productive of both economic profit and power relations.

Résumé Règles et programmes définissent les principes de production artistiques et théoriques, attachés depuis le début du xx e siècle à la recherche d’une pragmatique de l’art, susceptible d’inscrire la création dans un système de contraintes. L’article s’intéresse particulièrement à ces questions du côté de la production de l’œuvre. Si elles peuvent trouver leur fondement historique autour du Modernisme, les nouvelles pratiques artistiques des années soixante semblent parfois en poursuivre le projet. Mais l’affirmation de la raison et le (...) refus de toute subjectivité masquent bien souvent le véritable contenu des œuvres. (shrink)

This paper argues that the inappropriate framing and implementation of plagiarism detection systems in UK universities can unwittingly construct international students as ‘plagiarists’. It argues that these systems are often implemented with inappropriate assumptions about plagiarism and the way in which new members of a community of practice develop the skills to become full members of that community. Drawing on the literature and some primary data it shows how expectations, norms and practices become translated and negotiated in such (...) a way that legitimate attempts to conform with the expectations of the community of practice often become identified as plagiarism and illegitimate attempts at cheating often become obscured from view. It argues that this inappropriate framing and implementation of plagiarism detection systems may make academic integrity more illusive rather than less. It argues that in its current framing – as systems for ‘detection and discipline’ – plagiarism detection systems may become a new micro-politics of power with devastating consequences for those excluded. (shrink)

Application of the reliability of repairable systems on solving problems from constructing production systems takes an important place in the process of finding the optimal solution among the suggested system choices. The basic hypothesis when using the reliability of the repairable systems is that every machine is representing a component, a fact that is debatable when talking about technical sciences. However, considering the second assumption of the stationary process, the function of the availability is introduced. It (...) represents the measure between the reliability and the benefit of maintaining the components and the system as a whole one. An additional and the last reason for analyzing constructing machine as a whole one has an economic reason. From the aspect of the total cost and the capacity of the system, the function of the availability is catching more and more impact in the process of determinating the total cost in bill of quantities as the most important part of tender documents. Until former works, techno-economic optimisation usually ran over when choosing the system of the construction machines. In the work, there are shown the methodologies for gathering and analyzing the indicators of availabilities per unit of a company's machine park. The time of demission and reparation have been investigated among 34 components in the period of 6 years. Based on the obtained result for different conditions of machine exploitation and facilities, it is suggested the methodology of the future behaviour of the corresponding within the model optimization availability of constructing production system with the aim of eliminating extra criterion. The suggested model takes in consideration the total cost of the components when they are functional, and when they are not. This kind of approach enables the one who take choices decision of the height of profits, in the lenght of work in function of the projection of cash flow and managing with real indicators of functioning the system at the project level. Given the fact that the maintanance policy of machines is based on availability, and not on reliability of components, with the aim of maximizing the availability of different budget scenarios, a logical approach to the selection of the objective function in the terms of management of construction production systems is to minimize costs for a given availability of system constructing machinery is based on the use of historical data base with the values of the operational availability of components, conditions in which they function, in the process of forecasting the project availability for projects that follow. Ranking variant solutions is the result of the adopted function of the aim as a consequence due to enlargement methods of availability for serial parallel systems with the associated restrictions. For optimal system availability is taken a value that belongs to minimal total cost. However, it is predicted that after the end of the financial year, the real and projected indicators of system functions get compared to each other. Informational support to the proposed model is informational company system, which was built in the PHP programming language on the Linux software platform, and with data based in My SQL. The suggested model is tested on the system for the production and embedding bitumen bound materials on the specific project. Obtained results confirm the assumptions used in work. (shrink)

The aim of this study was to explore stakeholder perceptions of the contribution of an Automatic Milking System (AMS) to sustainable development of organic dairy production in Denmark and the Netherlands. In addition, reasons for the current difference in AMS use on organic dairy farms between both countries were explored. To answer above mentioned aims, farmers and advisors in both countries were interviewed using a focus group approach. Questions of the interviews were based on a literature review on sustainability (...) issues affected by introduction of AMS. Participants expressed no moral problems regarding AMS use. They, however, pointed out uncertainty about the economic gain, difficulties with grazing, adaptation problems to technology, and image problems towards consumers. The latter results from a reduction in grazing time affecting both animal welfare and product quality. The participants did not recognize eutrophication, as result of high stocking density on farmstead lots, as a problem caused by AMS. The milk quality problem related to AMS use, although acknowledged as crucial towards consumers, was not prioritized very highly, especially not by the farmers in both countries. All groups were, however, unanimous in their perception of how important image was as far as the consumers are concerned. The perception analysis revealed that Dutch participants were more concerned about the economic payoff of AMS use, and showed more reluctance towards enlargement than Danish ones. In addition, they acknowledged the small-scale naturalness of organic production. These differences in perception could possibly explain observed differences in AMS use in organic dairy production between Denmark and the Netherlands. (shrink)