We present this research to all researchers and scholars who have realized the existence of indeterminacy in all data, through the results they obtain and the values that are not accurate enough and that may cause loss to the systems and facilities under study, and we will present through it the emergence, foundations and development of Neutrosophic theories and their applications for more than two decades (1995- 2023) since it was defined and studied, along with its applications, in order to (...) be able to present new studies and research that keep pace with the great scientific development that our contemporary world is witnessing, through the use of research that has been published by the professionals and found on the attached open links. (shrink)

In this paper, we present an expansion of one of the well-known classical inventory management models, which is the static model of inventory management without a deficit and for a single substance, based on the neutrosophic logic, where we provide through this study a basis for dealing with all data, whether specific or undefined in the field of inventory management, as it provides safe environment to manage inventory without running into deficit , and give us an approximate ideal volume of (...) inventory. Since the ideal size is affected by the rate of demand for inventory, we present in this paper a study of the rate of demand for inventory when it is not precisely refined, and we find that the indeterminate values of the demand rate cannot be ignored, because they actually affect determining the ideal size of inventory and calculating its costs, thus affecting on the efficiency of the facility and achieve great profits for it. (shrink)

The linear programming method is one of the important methods of operations research that has been used to address many practical issues and provided optimal solutions for many institutions and companies, which helped decision makers make ideal decisions through which companies and institutions achieved maximum profit, but these solutions remain ideal and appropriate in If the conditions surrounding the work environment are stable, because any change in the data provided will affect the optimal solution and to avoid losses and achieve (...) maximum profit, we have, in previous research, reformulated the linear models using the concepts of neutrosophic science, the science that takes into account the instability of conditions and fluctuations in the work environment and leaves nothing to chance. While taking data, neutrosophic values carry some indeterminacy, giving a margin of freedom to decision makers. In another research, we reformulated one of the most important methods used to solve linear models, which is the simplex method, using the concepts of this science, and as a continuation of what we did in the previous two researches, we will reformulate in this research. The graphical method for solving linear models using the concepts of neutrosophics. We will also shed light on a case that is rarely mentioned in most operations research references, which is that when the difference between the number of unknowns and the number of constraints is equal to one, two, or three, we can also find the optimal solution graphically for some linear models. This is done by taking advantage of the conditions of non-negativity that linear models have, and we will explain this through an example in which the difference is equal to two. Also, through examples, we will explain the difference between using classical values and neutrosophic values and the extent of this’s impact on the optimal solution. (shrink)

Operations research science is defined as the science that is concerned with applying scientific methods to complex problems in managing and directing large systems of people, including resources and tools in various fields, private and governmental work, peace and war, politics, administration, economics, planning and implementation in various domains. It uses scientific methods that take the language of mathematics as a basis for it and uses computer, without which it would not have been possible to achieve numerical solutions to the (...) raised problems, those that need correct solutions, when the solutions abound and the options are multiple, so we need a decision based on correct scientific foundations and takes into account all the circumstances and changes that you can encounter the decision-maker during the course of work, and nothing is left to chance or luck, but rather everything that enters into the account and plays its role in decision-making, and we get that when we use the concepts of neutrosophic science to reformulate what the science of operations research presented in terms of methods and methods to solve many practical problems, so we will present in this research a study aimed at shedding light on the most important methods used to solve nonlinear models, which is the Lagrangian multiplier method for nonlinear models constrained by equality and then reformulated using the concepts of neutrosophic science. (shrink)

One of the most important theories in linear programming is the dualistic theory and its basic idea is that for every linear model has dual linear model, so that solving the original linear model gives a solution to the dual model. Therefore, when we solving the linear programming model, we actually obtain solutions for two linear models. In this research, we present a study of the models. The neutrosophic dual and the binary simplex algorithm, which works to find the optimal (...) solution for the original and dual models at the same time. The importance of this algorithm is evident in that it is relied upon in several operations research topics, such as integer programming algorithms, some nonlinear programming algorithms, and sensitivity analysis in linear programming. (shrink)

Science is the basis for managing the affairs of life and human activities, and living without knowledge is a form of wandering and a kind of loss. Using scientific methods helps us understand the foundations of choice, decision-making, and adopting the right solutions when solutions abound and options are numerous. Operational research is considered the best that scientific development has provided because its methods depend on the application of scientific methods in solving complex issues and the optimal use of available (...) resources in various fields, private and governmental work in peace and war, in politics and economics, in planning and implementation, and in various aspects of life. Its basic essence is to use the data provided for the issue under study to build a mathematical model that is the optimal solution. It is the basis on which decision makers rely in managing institutions and companies, and when operations research methods meet with the neutrosophic teacher, we get ideal solutions that take into account all the circumstances and fluctuations that may occur in the work environment over time. One of the most important operations research methods is the linear programming method. Which prompted us to reformulate the linear models, the graphical method, and the simplex method, which are used to obtain the optimal solution for linear models using the concepts of neutrosophic science. In this research, and as a continuation of what we presented previously, we will reformulate the modified simplex algorithm that was presented to address the difficulty that we were facing when applying the direct simplex algorithm. It is the large number of calculations required to be performed in each step of the solution, which requires a lot of time and effort. (shrink)

An important method for finding the optimal solution for linear and nonlinear models is the graphical method, which is used if the linear or nonlinear mathematical model contains one, two, or three variables. The models that contain only two variables are among the most models for which the optimal solution has been obtained graphically, whether these models are linear or non-linear in references and research that are concerned with the science of operations research, when the data of the issue under (...) study is classical data. In this research, we will present a study through, which we present the graphical method for solving Neutrosophical nonlinear models in the following case: A nonlinear programming issue, the objective function is a nonlinear function, and the constraints are linear functions. Note that we can use the same method if (i) the objective function follower is a linear follower and the constraints are nonlinear; (ii) the objective function is a non-linear follower and the constraints are non-linear. In the three cases, the nonlinear models are neutrosophic, and as we know, the mathematical model is a nonlinear model if any of the components of the objective function or the constraints are nonlinear expressions, and the nonlinear expressions may be in both. At the left end of the constraints are neutrosophic values, at least one or all of them. Then, the possible solutions to the neutrosophic nonlinear programming problem are the set of rays that fulfills all the constraints. As for the region of possible solutions, it is the region that contains all the rays that fulfill the constraints. The optimal solution is the beam that fulfills all constraints and at which the function reaches a maximum or minimum value, depending on the nature of the issue under study (noting that it is not necessary to be alone). (shrink)

The science of operations research is one of the modern sciences that have made a great revolution in all areas of life through the methods provided by it, suitable and appropriate to solve most of the problems that were facing researchers, scholars and those interested in the development of societies, and the most beneficiaries of this science were companies and institutions that are looking for scientific methods that help them manage their work so that they achieve the greatest profit and (...) the lowest cost, and one of the important methods that have been used in the management of companies we offer in this research two methods, Dynamic programming method. This method has been used in many practical matters and helped decision-makers in companies to achieve a maximum profit and less cost by formulating the reality of the state of the company and the data provided by decision-makers with a dynamic mathematical model that is solved using methods of solving dynamic models and we will provide in this research an example of this through the issue of choosing the optimal investment for the budget of a company so that it achieves a maximum profit, and the method of programming with integers: the method that provided these companies with solutions with integer values suitable for the nature of its work, through the use of the binary integer in the formulation of the appropriate mathematical model on the one hand, and on the other hand, the use of the binary integer variable helped to convert some nonlinear models that lead to some practical problems into linear models, and it should be noted here that in the previous two methods there is something indeterminable because we must make a decision in choosing or not choosing something, but the optimal solution that we will get remains A specific value because we are building the mathematical model for any realistic issue through the data provided by those responsible for the work and these data are calculated quantities and therefore they are uncertain values because their validity depends on the circumstances surrounding the work environment, they may be exposed to increase or decrease, and therefore the optimal solution on which the company will base its decision is suitable for specific values and any change in them can cause the company an uncalculated loss, so in this research we will use the concepts of neutrosophic science, the branch of science founded by the American scientist Florentin Smarandache in 1995 based on his belief that there is no absolute truth, a science that is interested in the study of ideas and concepts that are neither true nor false, but just in between, and we will take the data (calculated quantities) neutrosophic values that are specified or unspecified values are any set close to the calculated quantities, then the resulting mathematical model is a neutrosophic model and the optimal solution has neutrosophic values and thanks to the indefinite uncertainty that these values have, companies from the development of appropriate plans for all circumstances and thus achieve the greatest profit and the lowest cost, and we will clarify the above through two issues, the issue of optimal designation of a warehouse site, which we will formulate the mathematical model of using the neutrosophic integer programming method - and the issue of capital budget, which we will present in two different forms, we use in the first form the neutrosophic integer programming method and in the second the neutrosophic dynamic programming method. (shrink)

During the production process, production companies need to monitor the finished products and ensure their quality, which imposes on them the appointment of inspectors for auditing, and this appointment costs the company amounts that affect the general profit, so it strives to make this cost as low as possible and that the audit process is carried out with high accuracy because in case that the finished products do not conform to the basic specifications of the product, the company is required (...) to pay a fine. In this research, we will formulate the text of the problem appropriately for such a case and then we will build the appropriate mathematical model through which we can obtain the lowest possible cost of inspection, and we will present the study using classical values and neutrosophic values, and we will demonstrate them through an example that shows us the difference between them. (shrink)

We all know that problems of transportation and allocation appear frequently in practical life. We need to transfer materials from production centers to consumption centers to secure the areas’ need for the transported material or allocate machines or people to do a specific job at the lowest cost, or in the shortest time. We know that the cost factors Time is one of the most important factors that decision-makers care about because it plays an “important” role in many of the (...) practical and scientific issues that we face in our daily lives, and we need careful study to enable us to avoid losses. For this, the linear programming method was used, which is one of the research methods. Processes, where the problem data is converted into a linear mathematical model for which the optimal solution achieves the desired goal. Since these models are linear models, we can solve them using the direct simplex method and its modifications, but the specificity that these models enjoy has enabled scholars and researchers to find special methods that help us in obtaining the optimal solution. Whatever the method used, the goal is to determine the number of units transferred from any material from production centers to consumption centers, or to allocate a machine or person to do a job so that the cost or time is as short as possible. These issues were addressed according to classical logic, but the ideal solution was a specific value appropriate to the conditions in which the data was collected and does not take into account the changes that may occur in the work environment. In order to obtain results that are more accurate and enjoy a margin of freedom, we present in this book a study of transport issues and neutrosophic allocation issues and some methods for solving them. By neutrosophic issues we mean These are the problems in which the data are neutrosophic values, i.e. the required quantities and the available quantities. (shrink)