In the era of “big data,” science is increasingly information driven, and the potential for computers to store, manage, and integrate massive amounts of data has given rise to such new disciplinary fields as biomedical informatics. Applied ontology offers a strategy for the organization of scientific information in computer-tractable form, drawing on concepts not only from computer and information science but also from linguistics, logic, and philosophy. This book provides an introduction to the field of applied ontology that (...) is of particular relevance to biomedicine, covering theoretical components of ontologies, best practices for ontology design, and examples of biomedical ontologies in use. After defining an ontology as a representation of the types of entities in a given domain, the book distinguishes between different kinds of ontologies and taxonomies, and shows how applied ontology draws on more traditional ideas from metaphysics. It presents the core features of the Basic Formal Ontology (BFO), now used by over one hundred ontology projects around the world, and offers examples of domain ontologies that utilize BFO. The book also describes Web Ontology Language (OWL), a common framework for Semantic Web technologies. Throughout, the book provides concrete recommendations for the design and construction of domain ontologies. (shrink)

Basic Formal Ontology (BFO) is a top-level ontology consisting of thirty-six classes, designed to support information integration, retrieval, and analysis across all domains of scientific investigation, presently employed in over 350 ontology projects around the world. BFO is a genuine top-level ontology, containing no terms particular to material domains, such as physics, medicine, or psychology. In this paper, we demonstrate how a series of cases illustrating common types of change may be represented by universals, (...) defined classes, and relations employing the BFO framework. We provide discussion of these cases to provide a template for other ontologists using BFO, as well as to facilitate comparison with the strategies proposed by ontologists using different top-level ontologies. (shrink)

Basic Formal Ontology was created in 2002 as an upper-level ontology to support the creation of consistent lower-level ontologies, initially in the subdomains of biomedical research, now also in other areas, including defense and security. BFO is currently undergoing revisions in preparation for the release of BFO version 2.0. We summarize some of the proposed revisions in what follows, focusing on BFO’s treatment of material entities, and specifically of the category object.

Two senses of ‘ontology’ can be distinguished in the current literature. First is the sense favored by information scientists, who view ontologies as software implementations designed to capture in some formal way the consensus conceptualization shared by those working on information systems or databases in a given domain. [Gruber 1993] Second is the sense favored by philosophers, who regard ontologies as theories of different types of entities (objects, processes, relations, functions) [Smith 2003]. Where information systems ontologists seek to (...) maximize reasoning efficiency even at the price of simplifications on the side of representation, philosophical ontologists argue that representational adequacy can bring benefits for the stability and resistance to error of an ontological framework and also for its extendibility in the future. In bioinformatics, however, a third sense of ‘ontology’ has established itself, above all as a result of the successes of the Gene Ontology (hereafter: GO), which is a tool for the representation and processing of information about gene products and their biological functions [Gene Ontology Consortium 2000]. We show how Basic Formal Ontology (BFO) has established itself as an overarching ontology drawing on all three of the strands distinguished above, and describe applications of BFO especially in the treatment of biological granularity. (shrink)

Basic Formal Ontology (BFO) is a top-level ontology used in hundreds of active projects in scientific and other domains. BFO has been selected to serve as top-level ontology in the Industrial Ontologies Foundry (IOF), an initiative to create a suite of ontologies to support digital manufacturing on the part of representatives from a number of branches of the advanced manufacturing industries. We here present a first draft set of axioms and definitions of an IOF upper (...) ontology descending from BFO. The axiomatization is designed to capture the meanings of terms commonly used in manufacturing and is designed to serve as starting point for the construction of the IOF ontology suite. (shrink)

The notion of function is indispensable to our understanding of distinctions such as that between being broken and being in working order (for artifacts) and between being diseased and being healthy (for organisms). A clear account of the ontology of functions and functioning is thus an important desideratum for any top-level ontology intended for application to domains such as engineering or medicine. The benefit of using top-level ontologies in applied ontology can only be realized when each of (...) the categories identified and defined by a top-level ontology is integrated with the others in a coherent fashion. Basic Formal Ontology (BFO) has from the beginning included function as one of its categories, exploiting a version of the etiological account of function that is framed at a level of generality sufficient to accommodate both biological and artifactual functions. This account has been subjected to a series of criticisms and refinements. We here articulate BFO’s account of function, provide some reasons for favoring it over competing views, and defend it against objections. (shrink)

Description Logics are nowadays widely accepted as formalisms which provide reasoning facilities which allow us to discover inconsistencies in ontologies in an automatic fashion. Where ontologies are developed in modular fashion, they allow changes in one module to propogated through the system of ontologies automatically in a way which helps to maintain consistency and stability. For this feature to be utilized effectively, however, requires that domain ontologies be represented in a normalized form.

Numerous research groups are now utilizing Basic Formal Ontology as an upper-level framework to assist in the organization and integration of biomedical information. This paper provides elucidation of the three existing BFO subcategories of realizable entity, namely function, role, and disposition. It proposes one further sub-category of tendency, and considers the merits of recognizing two sub-categories of function for domain ontologies, namely, artifactual and biological function. The motivation is to help advance the coherent ontological treatment of functions, (...) roles, and dispositions, to help provide the potential for more detailed classification, and to shed light on BFO’s general make-up and use. (shrink)

This paper proposes a reformulation of the treatment of boundaries, at parts and aggregates of entities in Basic Formal Ontology. These are currently treated as mutually exclusive, which is inadequate for biological representation since some entities may simultaneously be at parts, boundaries and/or aggregates. We introduce functions which map entities to their boundaries, at parts or aggregations. We make use of time, space and spacetime projection functions which, along the way, allow us to develop a simple temporal (...) theory. (shrink)

Background: SNOMED CT is a large terminology system designed to represent all aspects of healthcare. Its current form and content result from decades of bottom-up evolution. Due to SNOMED CT’s formal descriptions, it can be considered an ontology. The Basic Formal Ontology (BFO) is a foundational ontology that proposes a small set of disjoint, hierarchically ordered classes, supported by relations and axioms. In contrast, as a typical top-down endeavor, BFO was designed as a foundational (...) framework for domain ontologies in the natural sciences and related disciplines. Whereas it is mostly assumed that domain ontologies should be created as extensions of foundational ontologies, a post-hoc harmonization of consolidated domain ontologies in use, such as SNOMED CT, is known to be challenging. Methods: We explored the feasibility of harmonizing SNOMED CT with BFO, with a focus on the SNOMED CT Clinical Finding hierarchy. With more than 100,000 classes, it accounts for about one third of SNOMED CT’s content. In particular, we represented typical SNOMED CT finding/disorder concepts using description logics under BFO. Three representational patterns were created and the logical entailments analyzed. Results: Under a first scrutiny, the clinical intuition that diseases, disorders, signs and symptoms form a homogeneous ontological upper-level class appeared incompatible with BFO’s upper-level distinction into continuants and occurrents. The Clinical finding class seemed to be an umbrella for all kinds of entities of clinical interest, such as material entities, processes, states, dispositions, and qualities. This suggests the conclusion that Clinical finding would not be a suitable upper-level class from an BFO perspective. On closer inspection of the taxonomic links within this hierarchy and the implicit meaning derived thereof, it became clear that Clinical finding classes do not characterize the entity (e.g. a fracture, allergy, tumor, pain, hemorrhage, seizure, fever) in a literal sense but rather the condition of a patient having that fracture, allergy, pain etc. This gives sense to the current characteristic of the Clinical Finding hierarchy, in which complex classes are modeled as subclasses of their constituents. Most of these taxonomic links are inferred, as the consequence of the ‘role group’ design pattern, which is ubiquitous in SNOMED CT and has often been subject of controversy regarding its semantics. Conclusion: Our analyses resulted in the proposal of (i) equating SNOMED CT’s ‘role group’ property with the reflexive and transitive BFO relation ‘has occurrent part’; and (ii) reinterpreting Clinical Findings as Clinical Occurrents, i.e. temporally extended entities in an organism, having one or more occurrents as temporal parts that occur in continuants. This re-interpretation was corroborated by a manual analysis of classes under Clinical Finding, as well as the identification of similar modeling patterns in other ontologies. As a result, SNOMED CT does not require any content redesign to establish compatibility with BFO, apart from this re-interpretation, and a suggested re-labeling. Regarding the feasibility of harmonizing terminologies with principled foundational ontologies post-hoc, our results provide support to the assumption that this does not necessarily require major redesign efforts, but rather a careful analysis of the implicit assumptions of terminology curators and users. (shrink)

Changes in an upper level ontology have obvious conse-quences for the domain ontologies that use it at lower levels. It is therefore crucial to document the changes made between successive versions of ontologies of this kind. We describe and apply a method for tracking, explaining and measuring changes between successive versions of upper level ontologies such as the Basic Formal Ontology (BFO). The proposed change-tracking method extends earlier work on Realism-Based Ontology Versioning (RBOV) and Evolutionary (...) Terminology Auditing (ETA). We describe here the application of this evaluation method to changes between BFO 1.0, BFO 1.1, and BFO 2.0. We discuss the issues raised by this application and describe the extensions which we added to the original evaluation schema in order to account for changes in an ontology of this type. Our results show that BFO has undergone eight types of changes that can be systematically explained by the extended evaluation schema. Finally, we discuss problematic cases, possible pitfalls and certain limits of our study that we propose to address in future work. (shrink)

As engineering applications require management of ever larger volumes of data, ontologies offer the potential to capture, manage, and augment data with the capability for automated reasoning and semantic querying. Unfortunately, considerable barriers hinder wider deployment of ontologies in engineering. Key among these is lack of a shared top-level ontology to unify and organise disparate aspects of the field and coordinate co-development of orthogonal ontologies. As a result, many engineering ontologies are limited to their scope, and functionally difficult to (...) extend or interoperate with other engineering ontologies. This paper demonstrates how the use of a top-level ontology, specifically the Basic Formal Ontology (BFO), greatly facilitates interoperability of multiple engineering-related ontologies. We constructed a system of formal linked ontologies by re-engineering legacy ontologies to be conformant with BFO and developing new BFO-conformant ontologies to capture knowledge in the engineering design, enterprise, human factors, manufacturing, and application domain of additive manufacturing. The resulting Integrated Framework for Additively Manufactured Products (IFAMP), including the body knowledge instantiated on its basis, serve as the basis for a proposed Design with Additive Manufacturing Method (DWAM), which we believe can support the design of innovative products with semantically enhanced ideation tools and enhanced access to application domain knowledge. The method and its facilitation through the ontological framework are demonstrated using a case study in medicine. (shrink)

The term ‘formal ontology’ was first used by the philosopher Edmund Husserl in his Logical Investigations to signify the study of those formal structures and relations – above all relations of part and whole – which are exemplified in the subject-matters of the different material sciences. We follow Husserl in presenting the basic concepts of formal ontology as falling into three groups: the theory of part and whole, the theory of dependence, and the theory (...) of boundary, continuity and contact. These basic concepts are presented in relation to the problem of providing an account of the formal ontology of the mesoscopic realm of everyday experience, and specifically of providing an account of the concept of individual substance. (shrink)

The central hypothesis of the collaboration between Language and Computing (L&C) and the Institute for Formal Ontology and Medical Information Science (IFOMIS) is that the methodology and conceptual rigor of a philosophically inspired formal ontology will greatly benefit software application ontologies. To this end LinKBase®, L&C’s ontology, which is designed to integrate and reason across various external databases simultaneously, has been submitted to the conceptual demands of IFOMIS’s Basic Formal Ontology (BFO). With (...) this, we aim to move beyond the level of controlled vocabularies to yield an ontology with the ability to support reasoning applications. (shrink)

The central hypothesis of the collaboration between Language and Computing (L&C) and the Institute for Formal Ontology and Medical Information Science (IFOMIS) is that the methodology and conceptual rigor of a philosophically inspired formal ontology greatly benefits application ontologies. To this end r®, L&C’s ontology, which is designed to integrate and reason across various external databases simultaneously, has been submitted to the conceptual demands of IFOMIS’s Basic Formal Ontology (BFO). With this project (...) we aim to move beyond the level of controlled vocabularies to yield an ontology with the ability to support reasoning applications. Our general procedure has been the implementation of a meta-ontological definition space in which the definitions of all the concepts and relations in LinKBase® are standardized in a framework of first-order logic. In this paper we describe how this standardization has already led to an improvement in the LinKBase® structure that allows for a greater degree of internal coherence than ever before possible. We then show the use of this philosophical standardization for the purpose of mapping external databases to one another, using LinKBase® as translation hub, with a greater degree of success than possible hitherto. We demonstrate how this offers a genuine advance over other application ontologies that have not submitted themselves to the demands of philosophical scrutiny. LinKBase® is one of the world’s largest applications-oriented medical domain ontologies, and BFO is one of the world’s first philosophically driven reference ontologies. The collaboration of the two thus initiates a new phase in the quest to solve the so-called “Tower of Babel”. (shrink)

I offer a formal ontological theory where the basic building blocks of the world are timeless events. The composition of events results in processes. Spacetime emerges as the system of all events. Things are construed as bundles of processes. I maintain that such a view is in accord with General Relativity and offers interesting prospects for the foundations of classical and quantum gravity.

Some formal ontological relations are identified, in the context of an account of ontological categorization. It is argued that neither formal ontological relations nor ontological categories should themselves be regarded as elements of being, but that this does not undermine the claim of formal ontology to be a purely objective science. It is also argued that some formal ontological relations, like some ontological categories, are more basic than others. A four‐category ontology is proposed, (...) in which two basic categories of universals and two basic categories of particulars are distinguished in terms of certain formal ontological relations characteristically obtaining between entities belonging to the different categories. (shrink)

Some formal ontological relations are identified, in the context of an account of ontological categorization. It is argued that neither formal ontological relations nor ontological categories should themselves be regarded as elements of being, but that this does not undermine the claim of formal ontology to be a purely objective science. It is also argued that some formal ontological relations, like some ontological categories, are more basic than others. A four‐category ontology is proposed, (...) in which two basic categories of universals and two basic categories of particulars are distinguished in terms of certain formal ontological relations characteristically obtaining between entities belonging to the different categories. (shrink)

The problem of concept representation is relevant for many sub-fields of cognitive research, including psychology and philosophy, as well as artificial intelligence. In particular, in recent years it has received a great deal of attention within the field of knowledge representation, due to its relevance for both knowledge engineering as well as ontology-based technologies. However, the notion of a concept itself turns out to be highly disputed and problematic. In our opinion, one of the causes of this state of (...) affairs is that the notion of a concept is, to some extent, heterogeneous, and encompasses different cognitive phenomena. This results in a strain between conflicting requirements, such as compositionality, on the one hand and the need to represent prototypical information on the other. In some ways artificial intelligence research shows traces of this situation. In this paper, we propose an analysis of this current state of affairs. Since it is our opinion that a mature methodology with which to approach knowledge representation and knowledge engineering should also take advantage of the empirical results of cognitive psychology concerning human abilities, we outline some proposals for concept representation in formal ontologies, which take into account suggestions from psychological research. Our basic assumption is that knowledge representation systems whose design takes into account evidence from experimental psychology may therefore give better results in many applications. (shrink)

The General Formal Ontology is a top-level ontology that is being developed at the University of Leipzig since 1999. Besides introducing some of the basic principles of the ontology, we expound axiomatic fragments of its formalization and present ontological models of several use cases. GFO is a top-level ontology that integrates objects and processes into a unified framework, in a way that differs significantly from other ontologies. Another unique selling feature of GFO is its (...) meta-ontological architecture, which includes set theory into ontology and which accounts for its specific role in common representation approaches. The second level of that architecture starts from the distinction of categories and individuals, which forms the backbone of the world’s structure. Furthermore, GFO comprises several kinds of categories, among them universals and concepts, and it considers several ontological regions and levels. In the context of this special issue paper, we study five pre-determined use cases from the perspective of GFO. The results of these analyses yield insights into how the ontology treats several important notions. Very abridged, this covers material objects and their composition; roles and social entities; properties with their relations to objects and processes, and their changing; changes of processes, including a functional perspective; and, eventually, the nature and changing of concepts as well as terminology. A final part summarizes application projects that use GFO in various contexts. (shrink)

This brief paper aims to underline which are the philosophical limits of mereotopology, when one takes it as a basic unitary theoretical framework for formal ontology. Mereotopology is a first-order theory of the relations among wholes, parts and the boundaries between parts, that combines mereological and topological concepts. Nowadays, with the expression “formal ontology” one intends either the computational (engineering) version, or the philosophical (categorial) one. It is important, then, to avoid terminological confusions. The main (...) philosophical reason that keeps me from developing the connection between computational and philosophical formal ontologies on mereotopological basis is the following: anti-Representationalism and Monism are two ontological stances very difficult to join together, as mereotopology does, if one takes into account the ontological implications of the emerging dynamical dual paradigm in the information theoretic approach to quantum physics. In general, it is this approach to the current fundamental and experimentally extremely successful physical theories about the microphysical realm, namely Quantum Mechanics and Quantum Field Theory, that allows to overcome the “gap” between the two disciplinary fields of formal ontology, making information a physical magnitude. I do not oppose anti-Representationalism, but its connection with the monistic stance, because of the fact that nowadays information appears as a basic component of the microphysical realm just like energy-matter. This fact justifies a realistic but information-matter dual ontology as the proper formal ontology of the emerging paradigm in the information theoretic approach to contemporary quantum physics. The primacy that Aristotle gives to the theory of principle (act/potency) as to the theory of categories is a very helpful tool to solve the main question that arises within a realistic dual ontological theoretical framework: the question of the non-stable nature of the categories, that reflect the increasingly complexity of the physical dynamic realistic orders. Here is the importance of an historical approach to the topic, given also the fact that mereological formal ontology originates with the works of three authors (Bolzano, Brentano, Husserl) that studied, directly or indirectly, Aristotle’s ontology. (shrink)

In lieu of an abstract, here is a brief excerpt of the content:FÉLIX MaRTÍNEZ-?????? TOWARDS A FORMAL ONTOLOGY OF FICTIONAL WORLDS In this discussion ' I propose a few concepts for the description and classification of fictional "worlds." The variety of fictional systems of"reality" can be understood, I diink, as an aspect ofthe phenomenon of style in literary imagination.2 But styles of imagination or of vision, and die style of literary works, are more than simply kinds of fictional (...) worlds. To put in some perspective my attempt at classification of literary works according to their systems of reality, I will make first a few remarks on the notion of style. It is a well-known preliminary problem when speaking of style diat this word seems to have more than one meaning in ordinary usage. I think that some ofits current meanings are rich and important, and that literary knowledge would profit if we could reconstruct them in abstract and defined concepts, so that the notions involved were somewhat clarified. I doubt diat diis is possible with current conceptual tools. We can see what is meant, say, when we hear diat a certain person we know "has style"; and we certainly distinguish diis attribute from others such as elegance, good manners, character, taste, originality, mannerisms, or idiosyncracies. Thus, we occasionally perceive in personal behavior a phenomenon called style. A conceptual description or a satisfactory definition of such a given, however, seems very difficult. Speaking of matters of art and literature, "style" has been used, among other things, to designate both the conventional forms of traditional expression (as in "manuals of style") and the anomalous, convention-breaking forms of highly individuated creation (as in die classic conception of Vosslerian-Spitzerian Stylistics, or in Buffon's "Le style c'est l'homme même," as usually understood). Style, dien, as conformity and style as singularity and deviance; style as impersonal decorum and as presence of a unique personal essence in the work. This perplexing ambiguity may be reducible though. Whether conventional and common or personal and innovative, style appears to be a form that characterizes and holds together a creation or a phenomenal entity. Indeed, the fact that 182 Félix Martínez-Bonati183 singular innovations of style often become the common trait of a school or current and sometimes a part of general tradition seems to indicate that neither singularity nor general acceptance are the most basic elements of die notion of style. On first reflection, we may conceive of style as a formal principle that consistently determines the constitution of die pertinent objects. Nonetíieless, constitutive form is too weak a definition for style, since it would also apply to what is called "technique" and even to genre. We must look for a more specific determination. There is anodier ambiguity in everyday uses of die word "style" diat deserves attention. We speak often of "good style" and "bad style." But sometimes we speak as if no style is bad and the thing that matters is to have style at all and as much of it as possible. Thus, we condemn a work because of its having no style or only a weak one. This contradiction probably derives from the confusion of a particular normative, a general normative, and a merely descriptive notion of style. We should keep, if possible, to a merely descriptive notion. Still another uncertainty of usage, in literary matters, relates to the (not universally accepted) restriction of the notion of style to a linguistic one; style, in this restricted usage, is seen as primarily an attribute of diction. The most numerous of literary studies of die style of singular works have been, so far as I can see, descriptions of idiolects. In many cases, the linguistic peculiarity is taken as an index of the world-view or die style of imagination diat is supposed to have produced the work. Alternative to this approach, indeed complementary, is the study of literary style as an attribute of die fictional entities to which literary discourse refers. We find the latter kind of approach mostly in characterizations of genres or of periods ("the naturalist novel," "romance," "classicism," etc.). One may suppose that an exhaustive analysis of the idiolect of a work... (shrink)

BACKGROUND -/- The importance of ontologies in the biomedical domain is generally recognized. However, their quality is often too poor for large-scale use in critical applications, at least partially due to insufficient training of ontology developers. -/- OBJECTIVE -/- To show the efficacy of guideline-based ontology development training on the performance of ontology developers. The hypothesis was that students who received training on top-level ontologies and design patterns perform better than those who only received training in the (...) basic principles of formal ontology engineering. -/- METHODS -/- A curriculum was implemented based on a guideline for ontology design. A randomized controlled trial on the efficacy of this curriculum was performed with 24 students from bioinformatics and related fields. After joint training on the fundamentals of ontology development the students were randomly allocated to two groups. During the intervention, each group received training on different topics in ontology development. In the assessment phase, all students were asked to solve modeling problems on topics taught differentially in the intervention phase. Primary outcome was the similarity of the students’ ontology artefacts compared with gold standard ontologies developed by the authors before the experiment; secondary outcome was the intra-group similarity of group members’ ontologies. -/- RESULTS -/- The experiment showed no significant effect of the guideline-based training on the performance of ontology developers (a) the ontologies developed after specific training were only slightly but not significantly closer to the gold standard ontologies than the ontologies developed without prior specific training; (b) although significant differences for certain ontologies were detected, the intra-group similarity was not consistently influenced in one direction by the differential training. -/- CONCLUSION -/- Methodologically limited, this study cannot be interpreted as a general failure of a guideline-based approach to ontology development. Further research is needed to increase insight into whether specific development guidelines and practices in ontology design are effective. (shrink)

The philosophy of science of Patrick Suppes is centered on two important notions that are part of the title of his recent book (Suppes 2002): Representation and Invariance. Representation is important because when we embrace a theory we implicitly choose a way to represent the phenomenon we are studying. Invariance is important because, since invariants are the only things that are constant in a theory, in a way they give the “objective” meaning of that theory. Every scientific theory gives a (...) representation of a class of structures and studies the invariant properties holding in that class of structures. In Suppes’ view, the best way to define this class of structures is via axiomatization. This is because a class of structures is given by a definition, and this same definition establishes which are the properties that a single structure must possess in order to belong to the class. These properties correspond to the axioms of a logical theory. In Suppes’ view, the best way to characterize a scientific structure is by giving a representation theorem for its models and singling out the invariants in the structure. Thus, we can say that the philosophy of science of Patrick Suppes consists in the application of the axiomatic method to scientific disciplines. What I want to argue in this paper is that this application of the axiomatic method is also at the basis of a new approach that is being increasingly applied to the study of computer science and information systems, namely the approach of formal ontologies. The main task of an ontology is that of making explicit the conceptual structure underlying a certain domain. By “making explicit the conceptual structure” we mean singling out the most basic entities populating the domain and writing axioms expressing the main properties of these primitives and the relations holding among them. So, in both cases, the axiomatization is the main tool used to characterize the object of inquiry, being this object scientific theories (in Suppes’ approach), or information systems (for formal ontologies). In the following section I will present the view of Patrick Suppes on the philosophy of science and the axiomatic method, in section 3 I will survey the theoretical issues underlying the work that is being done in formal ontologies and in section 4 I will draw a comparison of these two approaches and explore similarities and differences between them. (shrink)

This paper defends a view of the Gene Ontology (GO) and of Basic Formal Ontology (BFO) as examples of what the manufacturing industry calls product-service systems. This means that they are products (the ontologies) bundled with a range of ontology services such as updates, training, help desk, and permanent identifiers. The paper argues that GO and BFO are contrasted in this respect with DOLCE, which approximates more closely to a scientific theory or a scientific publication. (...) The paper provides a detailed overview of ontology services and concludes with a discussion of some implications of the product-service system approach for the understanding of the nature of applied ontology. Ontology developer communities are compared in this respect with developers of scientific theories and of standards (such as W3C). For each of these we can ask: what kinds of products do they develop and what kinds of services do they provide for the users of these products? (shrink)

The integration of information resources in the life sciences is one of the most challenging problems facing bioinformatics today. We describe how Language and Computing nv, originally a developer of ontology-based natural language understanding systems for the healthcare domain, is developing a framework for the integration of structured data with unstructured information contained in natural language texts. L&C’s LinkSuite™ combines the flexibility of a modular software architecture with an ontology based on rigorous philosophical and logical principles that is (...) designed to comprehend the basic formal relationships that structure both reality and the ways humans perceive and communicate about reality. (shrink)

We begin at the beginning, with an outline of Aristotle’s views on ontology and with a discussion of the influence of these views on Linnaeus. We move from there to consider the data standardization initiatives launched in the 19th century, and then turn to investigate how the idea of computational ontologies developed in the AI and knowledge representation communities in the closing decades of the 20th century. We show how aspects of this idea, particularly those relating to the use (...) of the term 'concept' in ontology development, influenced SNOMED CT and other medical terminologies. Against this background we then show how the Foundational Model of Anatomy, the Gene Ontology, Basic Formal Ontology and other OBO Foundry ontologies came into existence and discuss their role in the development of contemporary biomedical informatics. (shrink)

Current approaches to formal representation in biomedicine are characterized by their focus on either the static or the dynamic aspects of biological reality. We here outline a theory that combines both perspectives and at the same time tackles the by no means trivial issue of their coherent integration. Our position is that a good ontology must be capable of accounting for reality both synchronically (as it exists at a time) and diachronically (as it unfolds through time), but that (...) these are two quite different tasks, whose simultaneous realization is by no means trivial. The paper is structured as follows. We begin by laying out the methodological and philosophical background of our approach. We then summarize the structure and elements of the Basic Formal Ontology on which it rests, in particular the SNAP ontology of objects and the SPAN ontology of processes. Finally, we apply the general framework to the specific domain of biomedicine. (shrink)

In this paper, we discuss formal reconstructions of Anselm’s ontological argument. We first present a number of requirements that any successful reconstruction should meet. We then offer a detailed preparatory study of the basic concepts involved in Anselm’s argument. Next, we present our own reconstructions—one in modal logic and one in classical logic—and compare them with each other and with existing reconstructions from the reviewed literature. Finally, we try to show why and how one can gain a better (...) understanding of Anselm’s argument by using modern formal logic. In particular, we try to explain why formal reconstructions of the argument, despite its apparent simplicity, tend to become quite involved. (shrink)

Although the last decade has seen a proliferation of ontological approaches to arguments, many of them employ ad hoc solutions to representing arguments, lack interoperability with other ontologies, or cover arguments only as part of a broader approach to evidence. To provide a better ontological representation of arguments, we present the Arguments Ontology (ArgO), a small ontology for arguments that is designed to be imported and easily extended by researchers who work in different upper-level ontology frameworks, different (...) logics, and different approaches to argument evaluation. Unlike most ontological approaches to arguments, ArgO utilizes Basic Formal Ontology (BFO) as an upper-level ontology, and may be used alongside other commonly used ontologies in the BFO framework, including boththe Information Artifact Ontology (IAO), and the Information Entity Ontology (INFO). Critically, our proposal is principled, based on rigorous definitions and formal axioms out of which characterizations of arguments naturally fall. It is our hope that ArgO may assist researchers in many projects, including: integrating heterogeneous sources of evidence, structuring the content of semantic wikis, and enhancing semantic reasoning. (shrink)

In a first part, I defend that formal semantics can be used as a guide to ontological commitment. Thus, if one endorses an ontological view \(O\) and wants to interpret a formal language \(L\) , a thorough understanding of the relation between semantics and ontology will help us to construct a semantics for \(L\) in such a way that its ontological commitment will be in perfect accordance with \(O\) . Basically, that is what I call constructing (...) class='Hi'>formal semantics from an ontological perspective. In the rest of the paper, I develop rigorously and put into practice such a method, especially concerning the interpretation of second-order quantification. I will define the notion of ontological framework: it is a set-theoretical structure from which one can construct semantics whose ontological commitments correspond exactly to a given ontological view. I will define five ontological frameworks corresponding respectively to: (i) predicate nominalism, (ii) resemblance nominalism, (iii) armstrongian realism, (iv) platonic realism, and (v) tropism. From those different frameworks, I will construct different semantics for first-order and second-order languages. Notably I will present different kinds of nominalist semantics for second-order languages, showing thus that we can perfectly quantify over properties and relations while being ontologically committed only to individuals. I will show in what extent those semantics differ from each other; it will make clear how the disagreements between the ontological views extend from ontology to logic, and thus why endorsing an ontological view should have an impact on the kind of logic one should use. (shrink)

What follows is a first step towards an ontology of conscious mental processes. We provide a theoretical foundation and characterization of conscious mental processes based on a realist theory of intentionality and using BFO as our top-level ontology. We distinguish three components of intentional mental process: character, directedness, and objective referent, and describe several features of the process character and directedness significant to defining and classifying mental processes. We arrive at the definition of representational mental process as a (...) process that is the bringing into being, sustaining, modifying, or terminating of a mental representation. We conclude by outlining some benefits and applications of this approach. (shrink)

Grenon and Smith (2004) propose a framework for the ontology of things in space and time involving and invoking the distinction between continuants and occurrents, which has become a key element of Basic Formal Ontology (BFO). The terminology of SNAP (from “snapshot:” state of a continuant at a time) and SPAN (how an occurrent develops over an interval or timespan) occurs in that paper’s title. While any commonsense ontology will have a place for both continuants (...) and occurrents, there is much room for philosophical debate on whether one of them is more basic than the other, or can be reduced to the other, or whether they are equally fundamental, or whether they are two different perspectives on the same reality. Grenon and Smith opt for the last of these. They call the accounts of continuants (SNAP) and occurrents (SPAN) both “ontologies.” They do not have a single ontology of all that is in space and time. This dialog throws a few of the common arguments around a bit and comes to no sure conclusion. But one of the characters bears a faint resemblance to a certain Buffalonian philosopher. (shrink)

The Ontology for Biomedical Investigations (OBI) is an ontology that provides terms with precisely defined meanings to describe all aspects of how investigations in the biological and medical domains are conducted. OBI re-uses ontologies that provide a representation of biomedical knowledge from the Open Biological and Biomedical Ontologies (OBO) project and adds the ability to describe how this knowledge was derived. We here describe the state of OBI and several applications that are using it, such as adding semantic (...) expressivity to existing databases, building data entry forms, and enabling interoperability between knowledge resources. OBI covers all phases of the investigation process, such as planning, execution and reporting. It represents information and material entities that participate in these processes, as well as roles and functions. Prior to OBI, it was not possible to use a single internally consistent resource that could be applied to multiple types of experiments for these applications. OBI has made this possible by creating terms for entities involved in biological and medical investigations and by importing parts of other biomedical ontologies such as GO, Chemical Entities of Biological Interest (ChEBI) and Phenotype Attribute and Trait Ontology (PATO) without altering their meaning. OBI is being used in a wide range of projects covering genomics, multi-omics, immunology, and catalogs of services. OBI has also spawned other ontologies (Information Artifact Ontology) and methods for importing parts of ontologies (Minimum information to reference an external ontology term (MIREOT)). The OBI project is an open cross-disciplinary collaborative effort, encompassing multiple research communities from around the globe. To date, OBI has created 2366 classes and 40 relations along with textual and formal definitions. The OBI Consortium maintains a web resource providing details on the people, policies, and issues being addressed in association with OBI. (shrink)

Software application ontologies have the potential to become the keystone in state-of-the-art information management techniques. It is expected that these ontologies will support the sort of reasoning power required to navigate large and complex terminologies correctly and efficiently. Yet, there is one problem in particular that continues to stand in our way. As these terminological structures increase in size and complexity, and the drive to integrate them inevitably swells, it is clear that the level of consistency required for such navigation (...) will become correspondingly difficult to maintain. While descriptive semantic representations are certainly a necessary component to any adequate ontology-based system, so long as ontology engineers rely solely on semantic information, without a sound ontological theory informing their modeling decisions, this goal will surely remain out of reach. In this paper we describe how Language and Computing nv (L&C), along with The Institute for Formal Ontology and Medical Information Sciences (IFOMIS), are working towards developing and implementing just such a theory, combining the open software architecture of L&C’s LinkSuiteTM with the philosophical rigor of IFOMIS’s Basic Formal Ontology. In this way we aim to move beyond the more or less simple controlled vocabularies that have dominated the industry to date. (shrink)

The Industrial Ontologies Foundry (IOF) was formed to create a suite of interoperable ontologies. Ontologies that would serve as a foundation for data and information interoperability in all areas of manufacturing. To ensure that each ontology is developed in a structured and mutually coherent manner, the IOF has committed to the tiered architecture of ontology building based on the Basic Formal Ontology (BFO) as top level. One of the critical elements of a successful tiered architecture (...) build is the domain mid-level ontologies. However, thus far there has been no mid-level manufacturing ontology that is based on BFO. The IOF has recently released the IOF Core version 1 beta to fill this gap. This paper documents the development process and gives an overview of the current content of the IOF Core. Finally, the paper describes how the IOF Core can be used as the basis for a more domain-specific Supply Chain Ontology. (shrink)

In the visual representation of ontologies, in particular of part-whole relationships, it is customary to use graph theory as the representational background. We claim here that the standard graph-based approach has a number of limitations, and we propose instead a new representation of part-whole structures for ontologies, and describe the results of experiments designed to show the effectiveness of this new proposal especially as concerns reduction of visual complexity. The proposal is developed to serve visualization of ontologies conformant to the (...) Basic Formal Ontology. But it can be used also for more general applications, particularly in the biomedical domain. (shrink)

We propose an ontological theory that is powerful enough to describe both complex spatio-temporal processes (occurrents) and the enduring entities (continuants) that participate therein. The theory is divided into two major categories of sub-theories: (sub-) theories of type SPAN and (sub-)theories of type SNAP. These theories represent two complementary perspectives on reality and result in distinct though compatible systems of categories. In SNAP we have enduring entities such as substances, qualities, roles, functions; in SPAN we have perduring entities such as (...) processes and their parts and aggregates. We argue that both kinds of ontological theory are required in order to give a non-reductionism account of complex domains of reality. (shrink)

After motivating a framework for evaluating top-down, middle-out, middle-in, and bottom-up ontology development strategies, we apply our framework to investigate whether infectious disease ontologies - specifically, the Virus Infectious Disease Ontology (VIDO) and the Coronavirus Infectious Disease Ontology (CIDO) - effectively promote semantic interoperability.

We begin by describing recent developments in the burgeoning discipline of applied ontology, focusing especially on the ways ontologies are providing a means for the consistent representation of scientific data. We then introduce Basic Formal Ontology (BFO), a top-level ontology that is serving as domain-neutral framework for the development of lower level ontologies in many specialist disciplines, above all in biology and medicine. BFO is a bicategorial ontology, embracing both three-dimensionalist (continuant) and four-dimensionalist (occurrent) (...) perspectives within a single framework. We examine how BFO-conformant domain ontologies can deal with the consistent representation of scientific data deriving from the measurement of processes of different types, and we outline on this basis the first steps of an approach to the classification of such processes within the BFO framework. (shrink)

We describe a prototype ontology-driven information system (ODIS) that exploits what we call Portion of Reality (POR) representations. The system takes both sensor data and natural language text as inputs and composes on this basis logically structured POR assertions. The goal of our prototype is to represent both natural language and sensor data within a single framework that is able to support both axiomatic reasoning and computation. In addition, the framework should be capable of discovering and representing new kinds (...) of situations and thematic roles, (e.g., roles such as agent, patient and instrument), based on new compositions of existing representations. We applied our prototype in an intelligence analysis use case to test the hypothesis that a framework of this sort can produce usefully structured information from combined natural language and sensor data inputs. We further tested our hypothesis by adding an enhanced US Air Force ontology framework to our ODIS in order to (1) process a collection of sensor data, intel reports, and mission plans; (2) build composite POR representations from these data; and (3) machine analyze the fused results to infer mission threats. (shrink)

In this paper we propose an Ontology of Commercial Exchange (OCE) based on Basic Formal Ontology. OCE is designed for re-use in the Industrial Ontologies Foundry (IOF) and in other ontologies addressing different aspects of human social behavior involving purchasing, selling, marketing, and so forth. We first evaluate some of the design patterns used in the Financial Industry Business Ontology (FIBO) and Product Types Ontology (PTO). We then propose terms and definitions that we believe (...) will improve the representation of contractual obligations, sales processes, and their associated documents. A commercial exchange, for instance, involves mutual agreement to reciprocate actions, such as transferring money, performing a service, or transferring goods. (shrink)

The central hypothesis of the collaboration between Language and Computing (L&C) and the Institute for Formal Ontology and Medical Information Science (IFOMIS) is that the methodology and conceptual rigor of a philosophically inspired formal ontology greatly benefits application ontologies.[1] To this end LinKBase®, L&C’s ontology, which is designed to integrate and reason across various external databases simultaneously, has been submitted to the conceptual demands of IFOMIS’s Basic Formal Ontology (BFO).[2] With this project (...) we aim to move beyond the level of controlled vocabularies to yield an ontology with the ability to support reasoning applications. Our general procedure has been the implementation of a meta-ontological definition space in which the definitions of all the concepts and relations in LinKBase® are standardized in a framework of first-order logic. In this paper we describe how this standardization has already led to an improvement in the LinKBase® structure that allows for a greater degree of internal coherence than ever before possible. We then show the use of this philosophical standardization for the purpose of mapping external databases to one another, using LinKBase® as translation hub, with a greater degree of success than possible hitherto. We demonstrate how this offers a genuine advance over other application ontologies that have not submitted themselves to the demands of philosophical scrutiny. (shrink)

The development of manufacturing technologies for new materials involves the generation of a large and continually evolving volume of information. The analysis, integration and management of such large volumes of data, typically stored in multiple independently developed databases, creates significant challenges for practitioners. There is a critical need especially for open-sharing of data pertaining to engineering design which together with effective decision support tools can enable innovation. We believe that ontology applied to engineering (OE) represents a viable strategy for (...) the alignment, reconciliation and integration of diverse and disparate data. The scope of OE includes: consistent capture of knowledge pertaining to the types of entities involved; facilitation of cooperation among diverse group of experts; more effective ongoing curation, and update of manufacturing data; collaborative design and knowledge reuse. As an illustrative case study we propose an ontology focused on the representation of composite materials focusing in particular on the class of Functionally Graded Materials (FGM) in particular. The scope of the ontology is to provide information about the components of such materials, the manufacturing processes involved in creation, and diversity of application ranging from additive manufacturing to restorative dentistry. The ontology is developed using Basic Formal Ontology (BFO) and the Ontology for Biomedical Investigations (OBI). (shrink)

The view of nature we adopt in the natural attitude is determined by common sense, without which we could not survive. Classical physics is modelled on this common-sense view of nature, and uses mathematics to formalise our natural understanding of the causes and effects we observe in time and space when we select subsystems of nature for modelling. But in modern physics, we do not go beyond the realm of common sense by augmenting our knowledge of what is going on (...) in nature. Rather, we have measurements that we do not understand, so we know nothing about the ontology of what we measure. We help ourselves by using entities from mathematics, which we fully understand ontologically. But we have no ontology of the reality of modern physics; we have only what we can assert mathematically. In this paper, we describe the ontology of classical and modern physics against this background and show how it relates to the ontology of common sense and of mathematics. (shrink)

We will survey a range of ontologies relevant to space and ground system domains. The ontologies form part of the Common Core Ontology ecosystem (CCO) developed under the IARPA KDD initiative. We focus specifically on the Space Domain Ontologies, a suite of ontologies to support space situational awareness, including the Spacecraft Mission Ontology, Spacecraft Ontology, Space Event Ontology and Space Object Ontology.

Achieving space situational awareness requires, at a minimum, the identification, characterization, and tracking of space objects. Leveraging the resultant space object data for purposes such as hostile threat assessment, object identification, and conjunction assessment presents major challenges. This is in part because in characterizing space objects we reference a variety of identifiers, components, subsystems, capabilities, vulnerabilities, origins, missions, orbital elements, patterns of life, operational processes, operational statuses, and so forth, which tend to be defined in highly heterogeneous and sometimes inconsistent (...) ways. The Space Domain Ontologies are designed to provide a consensus-based realist framework for formulating such characterizations in a way that is both consistent and computable. Space object data are aligned with classes and relations in a suite of ontologies built around the existing Space Object Ontology. They are stored in a dynamically updated Resource Description Framework triple store, which can be queried to support space situational awareness and the needs of spacecraft operators and analysts. This paper provides an overview of the Space Domain Ontologies and their development and use. It presents the motivation for and advantages of the Space Domain Ontologies, including the benefits they provide for enhancing and maintaining long-term space situational awareness. (shrink)

While classifications of mental disorders have existed for over one hundred years, it still remains unspecified what terms such as 'mental disorder', 'disease' and 'illness' might actually denote. While ontologies have been called in aid to address this shortfall since the GALEN project of the early 1990s, most attempts thus far have sought to provide a formal description of the structure of some pre-existing terminology or classification, rather than of the corresponding structures and processes on the side of the (...) patient. We here present a view of mental disease that is based on ontological realism and which follows the principles embodied in Basic Formal Ontology and in the application of BFO in the Ontology of General Medical Science. We analyzed statements about what counts as a mental disease provided in the research agenda for the DSM-V, and in Pies' model. The results were used to assess whether the representational units of BFO and OGMS were adequate as foundations for a formal representation of the entities in reality that these statements attempt to describe. We then analyzed the representational units specific to mental disease and provided corresponding definitions. Our key contributions lie in the identification of confusions and conflations in the existing terminology of mental disease and in providing what we believe is a framework for the sort of clear and unambiguous reference to entities on the side of the patient that is needed in order to avoid these confusions in the future. (shrink)