In recent years there has been a number of promising technical and institutional developments regarding use of ontologies in industry. At the same time, however, most industrial ontology development work remains within the realm of academic research and is without significant uptake in commercial applications. In biomedicine, by contrast, ontologies have made significant inroads as valuable tools for achieving interoperability between data systems whose contents derive from widely heterogeneous sources. In this position paper, we present a set of principles learned (...) from the successful Open Biomedical Ontologies (OBO) Foundry initiative to guide the design and development of the Industrial Ontologies Foundry (IOF), which is a counterpart to the OBO Foundry initiative for the manufacturing industry. We also illustrate the potential utility of these principles by sketching the conceptual design of a framework for sustainable IOF development. (shrink)

The manufacturing industry is evolving rapidly, becoming more complex, more interconnected, and more geographically distributed. Competitive pressure and diversity of consumer demand are driving manufacturing companies to rely more and more on improved knowledge management practices. As a result, multiple software systems are being created to support the integration of data across the product life cycle. Unfortunately, these systems manifest a low degree of interoperability, and this creates problems, for instance when different enterprises or different branches of an enterprise interact. (...) Common ontologies (consensus-based controlled vocabularies) have proved themselves in various domains as a valuable tool for solving such problems. In this paper, we present a consensus-based Additive Manufacturing Ontology (AMO) and illustrate its application in promoting re-usability in the field of dentistry product manufacturing. (shrink)

The development of manufacturing technologies for new materials involves the generation of a large and continually evolving volume of information. The analysis, integration and management of such large volumes of data, typically stored in multiple independently developed databases, creates significant challenges for practitioners. There is a critical need especially for open-sharing of data pertaining to engineering design which together with effective decision support tools can enable innovation. We believe that ontology applied to engineering (OE) represents a viable strategy for the (...) alignment, reconciliation and integration of diverse and disparate data. The scope of OE includes: consistent capture of knowledge pertaining to the types of entities involved; facilitation of cooperation among diverse group of experts; more effective ongoing curation, and update of manufacturing data; collaborative design and knowledge reuse. As an illustrative case study we propose an ontology focused on the representation of composite materials focusing in particular on the class of Functionally Graded Materials (FGM) in particular. The scope of the ontology is to provide information about the components of such materials, the manufacturing processes involved in creation, and diversity of application ranging from additive manufacturing to restorative dentistry. The ontology is developed using Basic Formal Ontology (BFO) and the Ontology for Biomedical Investigations (OBI). (shrink)

The report describes an application of ontologies to the analysis of wind turbine manufacturing data. We show how applying ontologies to composite materials data may facilitate the discovery of optimum composite material designs that will deliver maximum wind turbine blade performance within environmental constraints.

The ability to access and share data is key to optimizing and streamlining any industrial production process. Unfortunately, the manufacturing industry is stymied by a lack of interoperability among the systems by which data are produced and managed, and this is true both within and across organizations. In this paper, we describe our work to address this problem through the creation of a suite of modular ontologies representing the product life cycle and its successive phases, from design to end of (...) life. We call this suite the Product Life Cycle (PLC) Ontologies. The suite extends proximately from The Common Core Ontologies (CCO) used widely in defense and intelligence circles, and ultimately from the Basic Formal Ontology (BFO), which serves as top level ontology for the CCO and for some 300 further ontologies. The PLC Ontologies were developed together, but they have been factored to cover particular domains such as design, manufacturing processes, and tools. We argue that these ontologies, when used together with standard public domain alignment and browsing tools created within the context of the Semantic Web, may offer a low-cost approach to solving increasingly costly problems of data management in the manufacturing industry. (shrink)

Functionally graded materials (FGMs) have been used in many different kinds of applications in recent years and have attracted significant research attention. However, we do not yet have a commonly accepted way of representing the various aspects of FGMs. Lack of standardised vocabulary creates obstacles to the extraction of useful information relating to pertinent aspects of different applications. A standard resource is needed for describing various elements of FGMs, including existing applications, manufacturing techniques, and material characteristics. This motivated the creation (...) of the FGM Ontology (FGMO) in 2016. Here, we present a revised and expanded version of the FGM Ontology, which includes enrichments along four dimensions: (1) documenting recent FGMs applications; (2) reorganising the framework to incorporate an updated representation of types of manufacturing processes; (3) enriching the axioms of the ontology; and (4) importing mid-level ontologies from the Common Core Ontologies (CCO) and Product Life Cycle (PLC) Ontologies. The work is being carried out within the framework of the Industry Ontology Foundry (IOF), and the ontology is conformant to Basic Formal Ontology (BFO). (shrink)

ABSTRACT Social media is becoming increasingly embedded in people’s daily lives. These virtual spaces are now regularly used as a tool for information dissemination. Drawing on the moral intensity literature combined with uses and gratifications theory, this research explores how using social media to consume information can affect the ethical decision-making process. This study compares the influence of two online media dissemination formats – an online news article and social media discussion thread – on individuals’ ethical perceptions and decisions. Results (...) indicate that social media usage has an effect on perceptions of social consensus, problem recognition, and ethical sensemaking. Overall, Social media is shown to inhibit ethical decision-making when used as an information dissemination tool. (shrink)

The article explores the digital innovations that are being used in a folk performance in West Bengal, namely the Chhau dance. The COVID-19 pandemic foregrounded the relevance of digital space across disciplines. Being an expression of the collective experience of the people of the Purulia district, Chhau dance is commonly associated with fostering and perpetuating folk and mythical beliefs through its extensive use of masks and dance movements steered by the Jhumur songs. While the common urge to archive the traditional (...) dance-drama form in its ‘authentic’ essence precipitates a digital turn within the performance, the digital contact paradoxically reorients the ‘authentic’ identity of this cultural practice. The present study seeks to use the ‘identity–authenticity’ interplay in the context of globalization as the crux of the article. Within this framework, the article analyses how a folk cultural practice like Chhau dance, with its recent innovations in masks and performances mandated by the pandemic, problematizes the debate. It further strives to recognize the implications of the digital presence of the performances as well as the performers, which, for many of the traditionalists, might have jeopardized the ritualistic practices that were considered the ‘essence’ of the performance. The research was conducted through ethnographic methods gathered through fieldwork to gain first-hand knowledge of the ground reality. (shrink)

Although consumers increasingly claim to demand ethical products and state that they are willing to reward firms that are ethical, studies have highlighted that there is a significant gap between consumers’ explicit attitudes toward ethical products and their actual purchase behavior. This has major implications for firm policies revolving around business ethics. This research contributes to the understanding of the attitude–behavior gap in ethical consumption that literature has identified but not explored much. We utilize the model of dual attitudes as (...) a basis for the arguments presented in the paper and test them. We suggest that the gap in ethical consumerism exists because individuals have implicit as well as explicit attitudes, which are impacted differentially by stimuli and elicit dissimilar behavioral responses and thus have different implications for business ethics policies. Two longitudinal studies are conducted to better understand the impact of an individual’s dual attitudes on preferences and choice. Our findings support the presence of dual attitudes in consumers. Explicit attitudes are found to be easily influenced by the nature of the stimuli. On the other hand, implicit attitudes are relatively unaffected by the nature of the stimuli present and remain relatively constant. Based on the findings, implicit attitudes guide behavior and determine an individual’s preferences. Even though explicit attitudes react to the stimuli presented, our findings suggest they have no impact on the choice of consumers. These findings improve the understanding of ethical consumption, provide a reason as to why the attitude–behavior gap exists, provide a foundation for future researchers and help firms better understand the impact of perceived business on creating a behavioral shift in ethical consumption. (shrink)

This paper is intended to explore the Rorty’s notion of truth and its vicinity and divergences with Putnam’s notion of truth. Rorty and Putnam, both the philosophers have developed their notion of truth against the traditional representational notion of truth but their strength lies in its distinctive characterization. For Putnam, truth is the property of a statement which cannot be lost but the justification of it could be. I will also examine the importance of Putnam’s idealized justificatory conditions without which (...) he may succumb to the charge of relativism at the same time how does Putnam overcome the tension between metaphysical and relativistic stances of truth. For Rorty, truth is not representational rather it is social, which means the justification for a true belief is not external but internal to the community of believers. I would further examine how Rorty tries to dispel the charge of relativism which is hard to overcome. Finally, I shall try to defend the concept of truth which is free from metaphysical baggage and relativistic threats; and in this enterprise Rorty walks half the way and Putnam completes the journey. (shrink)

The project of inquiring into the history of our morals is premised upon the idea that some of our deeply held moral convictions might have emerged through a complicated historical process, rather than, say, through a process of rational deliberation. Were that the case, our philosophical efforts to properly understand our present moral conceptions, as well as our efforts to criticize them, would certainly profit from serious attention to the history of our morals. Jesse Prinz notes, however, that there are (...) several different genealogical methods we could employ in pursuit of this project of historicizing morals.1 Prinz focuses upon three such methods—utilitarian genealogies (such as the ones offered by... (shrink)

I examine here Theory and Scholarship (taken to be formalized social scientific frameworks that seek to map out the real world and social actions in an objective fashion) via an autoethnographic lens. Chiefly, I ask how autoethnography as a research method reconfigures them: how may we extend knowledge using autoethnography? While much critique has centered on the "doing" (dispassionately?) versus "being" (going native?) of autoethnography, I argue that such a dichotomy is inherently false. Instead, doing is located within the ethnographer's (...) very being, so that a closer look at the autoethnographic research process is required, from conception to implementation to introspection. I attempt such a processual analysis here: drawing on an earlier social scientific project, I relate the intellectual and social process whereby it was translated into an autoethnography. Using a performative lens to illustrate the dialectical mode of doing and being in the research process, I intersperse portions of personal narrative with academic writing, to enable a disjunctural appreciation of the various layers of interpretation. While the epistemic framework I hold to here is indeed a poststructural one, privileging fragmentation and social situatedness, it also emphasizes continuity and interconnections in the research process. (shrink)

Journeying through the writings and activism of anti-colonial thinkers, anti-globalization protesters, and queer activists, Rao demonstrates that important currents of Third World protest have long battled against both the international and the domestic, in a manner that combines nationalist and cosmopolitan sensibilities.

Many of the policy choices we face that have implications for the lives of future generations involve creating a risk that they will live lives that are significantly compromised. I argue that we can fruitfully make use of the resources of Scanlon’s contractualist account of moral reasoning to make sense of the intuitive idea that, in many cases, the objection to adopting a policy that puts the interest of future generations at risk is that doing so wrongs those who will (...) live in the further future. (shrink)

This book provides a detailed analysis of classical and modern Indian views on consciousness along with their related meditative methods. It offers a critical analysis of three distinct trends of Indian thought.

Reasons and Recognition brings together fourteen new papers on an array of topics from the many areas to which Scanlon has made path-breaking contributions, ...

This is a review essay of Jeff McMahan's recent book The Ethics of Killing : Problems at the Margins of Life. In the first part, I lay out the central features of McMahan's account of the wrongness of killing and its implications for when it is permissible to kill. In the second part of the essay, I argue that we ought not to accept McMahan's rejection of species membership as having any bearing on whether it is permissible to kill a (...) particular individual, as there are ways of understanding its relevance that are more plausible than McMahan allows. (shrink)

The phenomenon of consciousness has always been a central question for philosophers and scientists. Emerging in the past decade are new approaches to the understanding of consciousness in a scientific light. This book presents a series of essays by leading thinkers giving an account of the current ideas prevalent in the scientific study of consciousness. The value of the book lies in the discussion of this interesting though complex subject from different points of view ranging from physics, computer science to (...) the cognitive sciences. Reviews of controversial ideas related to the philosophy of mind from western and eastern sources including classical Indian first person methodologies provide a breadth of coverage that has seldom been attempted in a book before. Additionally, chapters relating to the new approaches in computational modelling of higher order cognitive function and consciousness are included. The book is of great value for established as well as young researchers from a wide cross-section of interdisciplinary scientific backgrounds, aiming to pursue research in this field, as well as an informed public. * Presents the latest developments in the scientific study of consciousness * Critically reviews different theoretical and philosophical explanations related to the subject * An important book for both students and researchers in designing research projects on consciousness. (shrink)

This book presents and argues for a suitably articulated version of consensualism as a form of Kantian moral theory with an ability to powerfully illuminate the moral intuitions to which Kantian and utilitarian theories have traditionally appealed.

: By examining evidence from India, where quotas for women in local government were introduced in 1993, this article argues that institutional reform can disturb hegemonic discourses sufficiently to open a window of opportunity where deliberative democratic norms take root and where, in addition to the politics of recognition, the politics of redistribution also operates.

By examining evidence from India, where quotas for women in local government were introduced in 1993, this article argues that institutional reform can disturb hegemonic discourses sufficiently to open a window of opportunity where deliberative democratic norms take root and where, in addition to the politics of recognition, the politics of redistribution also operates.

By examining evidence from India, where quotas for women in local government were introduced in 1993, this article argues that institutional reform can disturb hegemonic discourses sufficiently to open a window of opportunity where deliberative democratic norms take root and where, in addition to the politics of recognition, the politics of redistribution also operates.

Recent events have highlighted large-scale systemic racial disparities in U.S. criminal justice based on race and other demographic characteristics. Although criminological datasets are used to study and document the extent of such disparities, they often lack key information, including arrestees’ racial identification. As AI technologies are increasingly used by criminal justice agencies to make predictions about outcomes in bail, policing, and other decision-making, a growing literature suggests that the current implementation of these systems may perpetuate racial inequalities. In this paper, (...) we argue that AI technologies should be investigated to understand how they recognize racial categories and whether they can be harnessed to fill missing race data. By bridging this gap, we can work towards better understanding racial inequalities in a wide range of contexts, most notably criminal justice. Using a multidisciplinary perspective, we rethink the design and methodology used in facial processing technology (FPT) based on supervised deep learning model (DLM) image classification. By modifying standard FPT pipelines to tackle multiple sources of DLM bias, we propose an experimental methodology based on ethical AI principles to generate binary (Black and White) racial categories using mugshots. We go beyond simply reporting DLM accuracies and address fundamental issues such as generalizability and interpretability by using a “self-auditing” approach. First, we evaluate the inference performances of 42 fine-tuned DLMs using unseen test images from the same dataset but subject to varying data augmentations. Next, to interpret and validate our methodological approach, we apply gradient-based saliency maps to assess the consistency of facial region relevance and attribution. Finally, drawing upon insights from three areas (computer science, sociology, and law), we investigate the efficacy of our DLM-based method as a tool for detecting racial inequalities in criminal justice. (shrink)

According to prominent bioethics scholars and international guidelines, researchers and sponsors have obligations to ensure that the products of their research are reasonably available to research participants and their communities. In other words, the claim is that research is unethical unless it has local social value. In this article, we argue that the existing conception of reasonable availability should be replaced with a social value obligation that extends to the global poor. To the extent the social value requirement has been (...) understood as geographically constrained to the communities that host research and the countries that can afford the products of research, it has neglected to include the global poor as members of the relevant society. We argue that a new conception of social value obligations is needed for two reasons. First, duties of global beneficence give reason for researchers, sponsors, and institutions to take steps to make their products more widely accessible. Second, public commitments made by many institutions acknowledge and engender responsibilities to make the products of research more accessible to the global poor. Future research is needed to help researchers and sponsors discharge these obligations in ways that unlock their full potential. (shrink)